Raise and support the rear of the vehicle securely on jackstands and block the front wheels. Place the transmission in the Neutral position, then remove the intermediate exhaust pipe/catalytic converter assembly, securing the driver's side muffler out of the way for access to the driver's side of the transmission. Disconnect the
Shift Cable from the transmission shift lever and the Park/Neutral position switch electrical connectors. While preventing the shift shaft and lever from rotating, remove the nut attaching the transmission shift lever to the shift shaft, ensuring the transmission remains in the neutral position before removing the lever. Disconnect the Park/Neutral position switch electrical connector, then remove the Park/Neutral switch bolts and the switch from the shift shaft. Install and align the Park/Neutral switch by first installing it to the shift shaft and tightening the mounting bolts fingertight. With the shift shaft in neutral, align the notch in the Park/Neutral switch with the transmission shift lever slots in the shift shaft, then tighten the Park/Neutral switch bolts to the specified torque. Complete the installation by reversing the removal procedure.