Other Name: TANK, Engine Coolant Recovery; Reservoir
$42.65MSRP: $63.75
You Save: $21.10 (34%)
Add to Cart
More Info
Fits the following Vehicles:
2016-2019 Chevrolet Cruze | LS (GMNA), LS 4 DOOR HATCHBACK(GMNA), LS 4 DOOR SEDAN, LT (GMNA), LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ (GMNA), LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
Less Info
Chevrolet Cruze Coolant Reservoir Parts Questions & Answers
A: To remove the coolant reservoir, start by disconnecting the cable from the negative battery terminal. Then, raise the vehicle and support it securely on jackstands. Drain approximately 1.4 quarts (1.5 liters) of coolant, ensuring that the coolant level is lower than that of the reservoir. Disconnect the hoses from the reservoir and remove the retaining clip from the left side of the reservoir. Slide the reservoir forward to detach it from the mounting tangs, then lift it up and disconnect the electrical connector from the coolant level sensor on the bottom of the reservoir. To install the coolant reservoir, simply reverse the removal steps. Finally, refill the cooling system.