Genuine Chevrolet Cruze Sway Bar Kit

Stabilizer Sway Bar Set

Enter your vehicle info to find more parts and verify fitment

  • Select Vehicle by VIN
  • Select Vehicle by Model
Select by VIN
Enter your VIN for the most accurate results.
Enter your VIN for the most accurate results.
or
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --

3 Sway Bar Kits found

  • Chevrolet Cruze Sway Bar Kit - 39005088
    View related parts

    Chevrolet Cruze Shaft Assembly, Front Stabilizer

    Part Number: 39005088
    • Other Name: SHAFT, Stabilizer; Stabilizer Bar
    • Position: Front
    $87.51 MSRP: $137.64
    You Save: $50.13 (37%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2016-2019 Chevrolet Cruze | LS (GMNA), LS 4 DOOR HATCHBACK(GMNA), LS 4 DOOR SEDAN, LT (GMNA), LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ (GMNA), LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
    Less Info
  • Chevrolet Cruze Sway Bar Kit - 42750576
    View related parts

    Chevrolet Cruze Shaft Assembly, Front Stab

    Part Number: 42750576
    • Other Name: Stabilizer Bar
    • Position: Front
    • Replaces: 13296533, 13346848
    $75.91 MSRP: $119.41
    You Save: $43.50 (37%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel
    Less Info
  • Chevrolet Cruze Sway Bar Kit - 39000784
    View related parts

    Chevrolet Cruze Shaft Assembly, Front Stabilizer

    Part Number: 39000784
    • Other Name: SHAFT, Stabilizer; Stabilizer Bar
    • Position: Front
    $87.40 MSRP: $137.48
    You Save: $50.08 (37%)
    Add to Cart
    More Info
    Fits the following Vehicles:
    • 2016-2019 Chevrolet Cruze | LS (GMNA), LS 4 DOOR HATCHBACK(GMNA), LS 4 DOOR SEDAN, LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
    Less Info

Chevrolet Cruze Sway Bar Kit Parts Questions & Answers

  • Q: How do you remove the bar,bushings and links?
    A: To remove the bushings and links, start by loosening the front wheel lug nuts and raising the front of the vehicle. Support it securely on jackstands and remove the front wheels. Then, remove and discard the nuts that attach the upper and lower ends of the sway bar links to the strut/coil spring assembly and to the sway bar. Detach the links. Lower and support the subframe enough to access the sway bar mounting brackets. Remove the bolts and nuts from the sway bar bushing brackets. Inspect the retainer bushings for cracks and tears. If any bushing is damaged, replace the sway bar and bushings as a set. Also, if the ballstuds on the links are loose or worn, replace the links. To install, guide the sway bar kit into place and install the bushing bracket bolts, tightening them to the specified torque. Then, install the links and tighten the link nuts to the proper torque. To remove the sway bar kit, detach the links from the bar and remove the sway bar bushing bracket bolts. Twist the sway bar kit up and remove it through the right wheel opening. The installation process is the reverse of the removal procedure.

Related Chevrolet Cruze Parts