My Garage
My Account
Cart
Genuine Chevrolet Cruze Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Vapor Canisters found
Chevrolet Cruze Canister Assembly, Evap Emission
Part Number: 13372197$96.91 MSRP: $197.70You Save: $100.79 (51%)
Chevrolet Cruze Canister Assembly, Evap Emis
Part Number: 84839160$86.93 MSRP: $158.06You Save: $71.13 (45%)Ships in 1-2 Business Days
Chevrolet Cruze CANISTER ASM-EVAP EMIS
Part Number: 42782784$139.73 MSRP: $254.06You Save: $114.33 (45%)Ships in 1-2 Business Days
Chevrolet Cruze Canister Assembly, Evap Emis
Part Number: 84839161$105.95 MSRP: $192.64You Save: $86.69 (45%)Ships in 1-2 Business Days
Chevrolet Cruze Vapor Canister
The Vapor Canister is installed in Chevrolet Cruze car models and is an essential element of the EVAP system, whose main task is to avoid the evaporation of hydrocarbons into the atmosphere. This component is more commonly known as the carbon or charcoal canister, is there to collect fuel vapors and return them into the engine in order that they can be burnt in the combustion chamber. The canister is normally located in the vicinity of the engine and the fuel supply or is mounted in the compartment of the automobile. Popular Chevrolet Cruze models over the years have had somewhat different Vapor Canisters, and they can contain features like replaceable filters as well as upgraded diagnostics when searching for leaks. Contemporary variants incorporate a canister vent solenoid and a fuel tank pressure sensor through which the ECM can detect the state of the system. These developments enable us to sustain the efficacy of the Chevrolet Cruze emissions management while conforming to the demands of the environment.
Each OEM Chevrolet Cruze Vapor Canister we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Cruze Vapor Canister Parts Questions & Experts Answers
- Q: How to replace the Canister Purge Valves, Fuel Pressure Sensor and Vapor Canister on Chevrolet Cruze?A:To replace the EVAP canister purge solenoid turn the turned the ignition key as OFF and the solenoid is located on the intake manifold. Release the electrical connector by pulling the retainer clip and the inlet and outlet quick connect union. Subsequently, remove the inlet and outlet purge line fittings and cover the line to ensure that it would not be contaminated. Slide the solenoid from its mounting tab and the process of installation is the same as the process of removal in reverse. For the EVAP canister vent solenoid, raise the rear of the vehicle and support it securely on jackstands, then unplug the electrical connector of the vent solenoid and then remove it in counterclockwise direction and for installation is vice versa. For the EVAP canister, more the rear of the car and take out the fuel tank backward until the EQAP canister is found. Use a screwdriver to deal with the hoses and to uncouple connectors and the electrical connector. On 1.8L models, also remove and disconnect the fuel tank pressure sensor electrical connector, then unclip the canister from its mounting bracket, and reinstallation is the reverse. To access the fuel tank pressure sensor, move the vehicle on an upward inclined plane and securely jack up the car and put on a jack stand and then remove the fuel tank. For 1.4L models, you will need to unplug the electrical connector to the sensor which is installed on the fuel pump module by rubber grommets and then rock this connector with two screw drivers. On 1.8L models, remove the electrical connector for the sensor located on the EVAP canister and bend it with two screws and the process of installation will be the opposite of this.
