How to replace the Wheel Seal on Chevrolet El Camino?

Begin by removing the axleshaft. Pry out the old oil seal from the end of the axle casing, using a large screwdriver or the inner end of the axleshaft itself as a lever. Apply high melting point grease to the oil seal recess. Tap the seal into position so that the lips are facing inwards and the metal face is visible from the end of the axle housing. When correctly installed, the face of the oil seal should be flush with the end of the axle casing.

Genuine Chevrolet El Camino Wheel Seal

Wheel Axle Seal

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Wheel Seals found

View related parts
Chevrolet El Camino Seal Assembly, Front Wheel Inner Bearing
Part Number: 3965092
- Other Name: SEAL, Front Wheel Bearing
- Position: Front Inner
$6.24 MSRP: $11.35
You Save: $5.11 (46%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1987 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
Less Info
View related parts
Chevrolet El Camino Seal,Rear Wheel Bearing
Part Number: 554631
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub
- Position: Rear
$10.97 MSRP: $20.71
You Save: $9.74 (48%)

Add to Cart
More Info
Fits the following Vehicles:
1982-1987 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
Less Info
View related parts
Chevrolet El Camino Seal,Rear Axle Shaft
Part Number: 26047378
- Other Name: SEAL, Rear Wheel Bearing Oil
- Position: Rear
More Info
Fits the following Vehicles:
1982-1987 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
Less Info

Chevrolet El Camino Wheel Seal Parts Questions & Answers

Seal Assembly, Front Wheel Inner Bearing
3965092
Q: How to replace the Wheel Seal on Chevrolet El Camino?
A: Begin by removing the axleshaft. Pry out the old oil seal from the end of the axle casing, using a large screwdriver or the inner end of the axleshaft itself as a lever. Apply high melting point grease to the oil seal recess. Tap the seal into position so that the lips are facing inwards and the metal face is visible from the end of the axle housing. When correctly installed, the face of the oil seal should be flush with the end of the axle casing.