My Garage
My Account
Cart
Genuine Chevrolet S10 Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Radiators found
Chevrolet S10 Radiator
Part Number: 15120548$242.51 MSRP: $364.13You Save: $121.62 (34%)Ships in 1-3 Business Days
Chevrolet S10 Radiator
The Radiator is an essential part which is fitted on Chevrolet S10 cars in order to allow the cooling of the engine coolant. This is a heat exchanger through which heat from the coolant passing through the tubes is transferred to the air passing through the fins. S10 radiators come with aluminum cores and plastic or aluminum tanks, but there are models made of copper or brass as well. There have been progress to a performance model, made of lightweight aluminum with welded tanks for improvement of the durability and heat exchange. Such performance models are characterised by the use of bigger tubes and high fin density to enhance the flow of coolant and heat. They come in direct fit and universal configurations and are suitable for street rods and racing among other uses to provide effective engine cool in various circumstances.
Each OEM Chevrolet S10 Radiator we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet S10 Radiator Parts Questions & Experts Answers
- Q: How do I remove and install a radiator and coolant reservoir tank on Chevrolet S10?A: To remove the radiator, start by disconnecting the battery cable at the negative terminal and draining the cooling system. Then, remove the air intake duct and upper fan shroud. If there is an automatic transmission or engine oil cooler, carefully remove the cooler lines from the radiator, plugging the ends to prevent leakage and dirt from entering. Disconnect the upper and lower radiator hoses and remove the lower fan shroud. Finally, pull the radiator straight up and out. For installation, replace any damaged hose clamps and radiator hoses before installing the radiator. If there have been leaks or cooling problems, have the radiator cleaned and tested. Installation is the reverse of removal, using new spring clips on oil cooler connections if necessary. After installation, fill the system with the proper antifreeze mixture and check the automatic transmission fluid level if applicable. To remove the coolant reservoir, remove the PCM from the top of the tank on Blazer and Jimmy models, or access the tank directly on some pickup models. Remove the overflow hose and mounting nuts, then remove the tank. Prior to installation, ensure the reservoir is clean and free of debris by washing it with soapy water and a brush if needed. Installation is the reverse of removal.
