2017 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
2016 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
2018 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
2019-2022 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
2006-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L
2004-2008 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L
2006-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, BASE 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
2009-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.6L
2006-2007 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 6 Cyl 3.5L, 6 Cyl 3.9L
A: To remove the power steering system, start by disconnecting the cable from the negative terminal of the battery. Then, remove the subframe and the stabilizer bar from the subframe. Next, remove the rack and pinion mounting bolts and detach the rack and pinion from the subframe. To install the power steering system, follow the reverse of the removal steps. Additionally, program the electronic power steering control module using the appropriate scanner at a dealership or repair facility. For the power steering assist motor and control module, remove the rack and pinion if not already done. Disconnect the electrical connector from the motor and remove the motor-to-rack and pinion mounting bolts. Detach the motor from the rack and pinion. To install, follow the reverse of the removal procedure, ensuring to install a new drive coupling and O-ring and lubricating the O-ring with multi-purpose grease. Install new mounting bolts and tighten them to the proper torque specifications. Finally, install the rack and pinion and transfer the key cycle count from the old steering gear control module to the new one.