How do you remove the vacuum pump on Chevrolet Express and GMC Savana?

Disconnect the negative battery terminal. Remove the drive belts and vacuum pump belt. Disconnect the vacuum line quick-connect fitting at the side of the vacuum pump. Remove the bolts securing the vacuum pump to the engine block. Remove the vacuum pump and the gasket. Installation is the reverse of removal. Install the mounting bolts finger tight, then tighten them to the proper torque specifications.

Genuine GMC Savana Vacuum Pump

Vacuum Pressure Pump

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Vacuum Pumps found

View related parts
GMC Savana Pump,Vacuum
Part Number: 89017558
- Other Name: PUMP, Engine Vacuum Pump; Vacuum Pump
- Replaces: 12556549, 26039593, 97288505, 12562793
$219.53 MSRP: $455.83
You Save: $236.30 (52%)

Add to Cart
More Info
Fits the following Vehicles:
1996-2002 GMC Savana | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RECREATIONAL VEHICLE EXPRESS, 1 TON COMMERCIAL/RECREATIONAL VEHICLE SAVANA, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 8 Cyl 6.5L Diesel
Less Info
View related parts
GMC Savana Pump Assembly, Heater & A/C Control Vacuum
Part Number: 23490194
- Other Name: PUMP, A/C Vacuum Control
- Replaces: 15106862, 25847999
$166.46 MSRP: $299.92
You Save: $133.46 (45%)

Add to Cart
More Info
Fits the following Vehicles:
2006-2016 GMC Savana | 1 TON CARGO EXPRESS, 1 TON CARGO SAVANA, 1 TON COMMERCIAL/RV CUTAWAY, 1 TON PASSENGER, 3/4 TON CARGO EXPRESS, 3/4 TON CARGO SAVANA, 3/4 TON PASSENGER EXPRESS, 3/4 TON PASSENGER SAVANA | 8 Cyl 6.6L Diesel
Less Info

GMC Savana Vacuum Pump Parts Questions & Answers

Pump,Vacuum
89017558
Q: How do you remove the vacuum pump on Chevrolet Express and GMC Savana?
A: Disconnect the negative battery terminal. Remove the drive belts and vacuum pump belt. Disconnect the vacuum line quick-connect fitting at the side of the vacuum pump. Remove the bolts securing the vacuum pump to the engine block. Remove the vacuum pump and the gasket. Installation is the reverse of removal. Install the mounting bolts finger tight, then tighten them to the proper torque specifications.