Genuine GMC Sierra Sway Bar Kit

GMC Sierra Sway Bar Kit Parts Questions & Answers

• Shaft, Front Stabilizer
  15252732
  Q: How to remove and install a front stabilizer bar and stabilizer bar bushing on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

  A: To remove the sway bar kit, the vehicle must be raised and securely supported on jackstands. The oil pan skid plate or engine shield, if present, should be removed. The link bolts and sway bar kit bracket bolts should be removed, followed by the sway bar kit itself. The sway bar bushings should also be removed and all parts inspected for wear and damage. When installing the sway bar bushings, it is important to position them correctly with the slits facing forward for 1500 models and rearward for 2500/3500 models. The installation process is the reverse of removal, with all fasteners tightened to torque specifications and thread-locking compound (blue) used on the bolts.
• Shaft, Rear Stabilizer
  15095086
  Q: How to remove and install a rear stabilizer bar assembly and stabilizer bar bushing from Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

  A: To remove the sway bar kit assembly, loosen the rear wheel lug nuts, remove the sway bar kit link-to-frame nuts/bolts and the nuts from the lower ends of the links, and separate the link from the bar. Inspect the sway bar bushings and link bushing before installing the sway bar kit.