How to replace the transfer case seal on GMC Terrain?

This procedure applies only to NVG-900 transfer cases, as the output shaft seal on the Getrag 760 transfer case is not typically serviced while in the vehicle. Begin by raising the vehicle and securely supporting it on jackstands. Drain the transfer case lubricant, then remove the driveshaft. Mark the relative positions of the pinion, nut, and flange. Use a beam-or dial-type inch-pound torque wrench to determine the torque required to rotate the pinion and record it for later use. Count the number of threads visible between the end of the nut and the end of the pinion shaft, and record that as well. Remove the flange mounting nut using a chain wrench to hold the pinion flange while loosening the locknut. A small puller will be required to remove the companion flange, ensuring it has two bolts that screw into the companion flange. Pry out the seal with a screwdriver or seal removal tool, taking care not to damage the seal bore. Lubricate the lips of the new seal with multi-purpose grease and tap it evenly into position with a seal installation tool or a large socket, ensuring it enters the housing squarely and is tapped to its full depth. Align the mating marks made before disassembly and install the companion flange, tightening the pinion nut if necessary to draw the flange into place. Carefully tighten the nut until the original number of threads are exposed and the marks are aligned. Measure the torque required to rotate the pinion and tighten the nut in small increments until it matches the previously recorded figure. Finally, connect the driveshaft, add the specified lubricant to the transfer case, and lower the vehicle.

Genuine GMC Terrain Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

20 Transfer Case Seals found

View related parts
GMC Terrain Seal, Power Transfer U Face
Part Number: 23277803
$2.09 MSRP: $3.46
You Save: $1.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Input Shaft Seal
- Replaces: 19208891
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case Input Shaft
Part Number: 19210795
$33.73 MSRP: $55.83
You Save: $22.10 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Replaces: 19132942
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case Input Shaft (Right)
Part Number: 19132945
$34.10 MSRP: $56.44
You Save: $22.34 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case Rear Output Shaft
Part Number: 19132939
$19.48 MSRP: $32.24
You Save: $12.76 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal, Differential Drive Pinion Gear (O Ring)
Part Number: 23206807
$0.74 MSRP: $1.34
You Save: $0.60 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal,Transfer Case Input Shaft (O Ring)
Part Number: 19132943
$4.21 MSRP: $6.97
You Save: $2.76 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Transfer Case Intermediate Drive Shaft Seal (O, Ring)
Part Number: 19132944
$0.35 MSRP: $0.58
You Save: $0.23 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal,Transfer Case Intermediate Drive Shaft (O, Ring); Input Shaft Seal
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 , SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case Intermediate Drive Shaft (Radial Lip)
Part Number: 19206322
$38.98 MSRP: $61.33
You Save: $22.35 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case
Part Number: 19132946
$12.27 MSRP: $19.58
You Save: $7.31 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal,Transfer Case Rear Output Drive Shaft Housing (O Ring)
Part Number: 19208892
$23.11 MSRP: $36.84
You Save: $13.73 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Rear
- Replaces: 19132940
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal, Pwr Trfer U Output Shf
Part Number: 84681932
$31.69 MSRP: $52.46
You Save: $20.77 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Output Shaft Seal
- Replaced by: 85732461
- Replaces: 23432724, 84585185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal, Power Transfer U Face
Part Number: 84297549
$2.90 MSRP: $4.63
You Save: $1.73 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Pwr Trfer U Face; Input Shaft Seal
- Replaces: 23432719
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal, Power Transfer U Cover To Intermediate Drive Shaft
Part Number: 23432721
$30.98 MSRP: $49.40
You Save: $18.42 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Output Shaft Seal
- Replaced by: 85732462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal,Transfer Case
Part Number: 19178699
$46.95 MSRP: $74.88
You Save: $27.93 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 GMC Terrain | SLE1 SUV, SLE2 SUV, SLT SUV | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
GMC Terrain Seal, Automatic Transmission Case (O Ring) (Rear Accumulator, To, Case)
Part Number: 24264987
$0.76 MSRP: $1.21
You Save: $0.45 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, A/Trns Case (O Ring) (Rear Accum, To, Case)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
GMC Terrain Seal, Power Transfer U Intermediate Drive Shaft To Input S
Part Number: 23349897
$25.08 MSRP: $39.99
You Save: $14.91 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Pwr Trfer U Inter Drv Shf To Input S
- Replaced by: 86506586
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal, Power Transfer U Input Shaft
Part Number: 23349898
$26.97 MSRP: $44.63
You Save: $17.66 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Pwr Trfer U Input Shf; Input Shaft Seal
- Replaced by: 86506587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal, Power Transfer U Cover Housing
Part Number: 23349896
$11.21 MSRP: $18.56
You Save: $7.35 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Pwr Trfer U Cvr Hsg
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal,Transfer Case Idler Gear Shaft Rear (O Ring)
Part Number: 55571456
$2.40 MSRP: $3.77
You Save: $1.37 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
GMC Terrain Seal,Transfer Case Idler Gear Shaft Front (O Ring)
Part Number: 55571457
$2.49 MSRP: $3.91
You Save: $1.42 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 GMC Terrain | 4 DOOR SLE2, 4 DOOR SLE2 , 4 DOOR SLT1, 4 DOOR SLT1 , 4 DOOR SLT2, 4 DOOR SLT2 | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L

GMC Terrain Transfer Case Seal

The compact SUV's power split hardware is guarded by the GMC Terrain Transfer Case Seal, which blocks lubricant from escaping the transfer case and causing a leak that could starve the gears and bearings of the oil necessary for smooth spinning. The seal employs a spring-backed elastomer lip that grips the output shaft. Subsequently, when grease is applied at installation, the contact surface is hydraulically formed tight to maintain full factory fluid quantity for adequate cooling, lubrication, and hydraulic force. The earlier GMC crossover editions had a basic nitrile rubber Transfer Case Seal, which eventually gave way to heat-resistant synthetic blends due to an increase in drivetrain torque. Nevertheless, the flat face must be seated flush to the housing. When the supporting bushing wears out, even a new Transfer Case Seal will seep because the shaft wobble disrupts its centering. Therefore, both parts will be swapped together. Every owner of a GMC Terrain should always check the driveway spots to make sure there isn't any leaking Transfer Case Seal. This will cause extensive gear damage and will require costly repairs. So, a timely replacement will keep any Terrain confidently moving on with life once the Transfer Case Seal has been refreshed.

Each OEM GMC Terrain Transfer Case Seal we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Terrain Transfer Case Seal Parts Questions & Experts Answers

Seal,Transfer Case Input Shaft (O Ring)
19132943
Q: How to replace the transfer case seal on GMC Terrain?
A:
This procedure applies only to NVG-900 Transfer Cases, as the output shaft seal on the Getrag 760 transfer case is not typically serviced while in the vehicle. Begin by raising the vehicle and securely supporting it on jackstands. Drain the transfer case lubricant, then remove the driveshaft. Mark the relative positions of the pinion, nut, and flange. Use a beam-or dial-type inch-pound torque wrench to determine the torque required to rotate the pinion and record it for later use. Count the number of threads visible between the end of the nut and the end of the pinion shaft, and record that as well. Remove the flange mounting nut using a chain wrench to hold the pinion flange while loosening the locknut. A small puller will be required to remove the companion flange, ensuring it has two bolts that screw into the companion flange. Pry out the seal with a screwdriver or seal removal tool, taking care not to damage the seal bore. Lubricate the lips of the new seal with multi-purpose grease and tap it evenly into position with a seal installation tool or a large socket, ensuring it enters the housing squarely and is tapped to its full depth. Align the mating marks made before disassembly and install the companion flange, tightening the pinion nut if necessary to draw the flange into place. Carefully tighten the nut until the original number of threads are exposed and the marks are aligned. Measure the torque required to rotate the pinion and tighten the nut in small increments until it matches the previously recorded figure. Finally, connect the driveshaft, add the specified lubricant to the transfer case, and lower the vehicle.

Related GMC Terrain Parts

Browse by Year

2024 Transfer Case Seal 2023 Transfer Case Seal 2022 Transfer Case Seal 2021 Transfer Case Seal 2020 Transfer Case Seal 2019 Transfer Case Seal 2018 Transfer Case Seal 2017 Transfer Case Seal 2016 Transfer Case Seal 2015 Transfer Case Seal 2014 Transfer Case Seal 2013 Transfer Case Seal 2012 Transfer Case Seal 2011 Transfer Case Seal 2010 Transfer Case Seal