Genuine Oldsmobile Custom Cruiser Body Mount Hole Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Body Mount Hole Plugs found

View related parts
Oldsmobile Custom Cruiser Plug Assembly, Floor Panel Drain Hole
Part Number: 14049810
$9.80 MSRP: $14.65
You Save: $4.85 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PLUG, Floor and Toe Panel Access; Dash Panel Plug, Hole Plug
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Oldsmobile Custom Cruiser | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Oldsmobile Custom Cruiser Plug, Front Door Inner Panel At Mirror
Part Number: 20371801
$5.59 MSRP: $8.35
You Save: $2.76 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PLUG, Door Outside Handle
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Oldsmobile Custom Cruiser | STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Oldsmobile Custom Cruiser Plug,Lift Gate Inner Panel Drain Hole
Part Number: 10111937
$5.05 MSRP: $7.55
You Save: $2.50 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: COVER, End Gate Top and Bottom; Lift Gate Drain Plug
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Oldsmobile Custom Cruiser | STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Oldsmobile Custom Cruiser Plug,Rocker Inner Panel Rear Extension Hole
Part Number: 25652432
Product Specifications
- Other Name: PLUG, Door Trim/Access
- Position: Rear Inner
- Replaces: 21110669, 20749696, 22539445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1990 Oldsmobile Custom Cruiser | STATION WAGON | 8 Cyl 5.0L
View related parts
Oldsmobile Custom Cruiser Plug, Center Pillar Electric Conduit Hole
Part Number: 4771203
Product Specifications
- Other Name: PLUG, Fuel Door & Body Side
- Position: Center
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1992 Oldsmobile Custom Cruiser | STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L

Oldsmobile Custom Cruiser Body Mount Hole Plug

With a solid and heat-resistant seal, the Oldsmobile Custom Cruiser Body Mount Hole Plug prevents splash, grit, and engine warmth from entering the passenger compartment through the frame holes, thus safeguarding the passengers and electronic devices. The mounting plug locks into place, creating a weatherproof cavity while helping add stiffness to the lengthy wagon chassis. This second generation Oldsmobile Custom Cruiser Body Mount Hole Plug is built to factory specs. Drivers've updated the coated metal and rubber sandwich in the Oldsmobile Custom Cruiser Body Mount Hole Plug. Drivers' drivers say it bends with the frame rather than cracking. That means the ride stays whisper quiet for many family road trips. The Oldsmobile Custom Cruiser Body Mount Hole Plug is easy to install and is pushed into the hole with your thumb until it is flush. The underbody lines are kept intact and ground clearance is not compromised. The Oldsmobile Custom Cruiser Body Mount Hole Plug will plug the mount points in your wagon whether the hefty 350 V8 from the seventies, the lighter downsized platform from the eighties, or the air bag equipped nineties redesign. One plug fits all and all works. The Body Mount Hole Plug also dampens vibration at every mount while trimming harshness felt through the floorboards. Since the Body Mount Hole Plug is virtually weightless, it saves weight and saves fuel that would have been wasted due to extra mass while also preventing mounting area flex so anti-lock braking sensors function accurately. This intelligent combination of corrosion resistance, vibration control, and easy installation has earned the connector a good name for durability and safety, ensuring the beloved wagons are always ready for daily errands or cross-country cruises with virtually no upkeep.

Each OEM Oldsmobile Custom Cruiser Body Mount Hole Plug we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.