How is the trunk lock cylinder secured to the trunk and how to remove and install it on an Oldsmobile Cutlass?

This lock cylinder is attached to the trunk through the use of two lock nuts and washers or through the use of a retaining ring at the interior surface of the trunk. First of all, get behind the car and release the hinge of the trunk lid and then unscrew the two retaining nuts, washers and guards or unify the retainer around the cylinder. Following that, one will have to uninstall the lock cylinder. When installing the unit the lock cylinder shaft must move and come into contact with the lock.

Genuine Oldsmobile Cutlass Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Trunk Lock Cylinders found

View related parts
Oldsmobile Cutlass Cylinder Kit, Rear Compartment Lid Lock (Uncoded)
Part Number: 15822406
$13.05 MSRP: $18.75
You Save: $5.70 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER KIT, Rear Compartment or Tailgate Lock Cylinder; Lock Cylinder
- Position: Rear
- Replaces: 12523632, 12533511
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Oldsmobile Cutlass | SEDAN LEVEL I, SEDAN LEVEL II | 6 Cyl 3.1L
View related parts
Oldsmobile Cutlass Rear Compartment Lid Lock Cylinder
Part Number: 12502670
$6.76 MSRP: $10.10
You Save: $3.34 (34%)
Product Specifications
- Other Name: Cylinder,Rear Compartment Lid Lock; Cylinder, Cylinder & Key, Lock Cylinder
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1997 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, INTERNAL 2 DOOR, INTERNAL 4 DOOR, S 4 DOOR, SL 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L
View related parts
Oldsmobile Cutlass Rear Compartment Lid Lock Cylinder Kit (Uncoded)
Part Number: 12398667
Product Specifications
- Other Name: Cylinder Kit,Rear Compartment Lid Lock (Uncoded)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1991 Oldsmobile Cutlass | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, LS 2 DOOR, LS 2 DOOR NOTCHBACK, LS 4 DOOR, S 2 DOOR, SL 2 DOOR, SL 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.1L, 6 Cyl 3.3L, 6 Cyl 3.4L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L
View related parts
Oldsmobile Cutlass Cylinder Pkg, Lift Gate Lock (Uncoded)
Part Number: 12506779
Product Specifications
- Other Name: CYLINDER KIT, Rear Compartment or Tailgate Lock Cylinder; Cylinder, Lock Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Oldsmobile Cutlass | S STATION WAGON, SL STATION WAGON | 4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.1L, 6 Cyl 3.3L

Oldsmobile Cutlass Trunk Lock Cylinder

The Oldsmobile Cutlass Trunk Lock Cylinder is the main device that allows drivers to seal the rear compartment against unwanted hands. Inserting the factory key into the Trunk Lock Cylinder and turning it allows an internal tumbler to align and pull a latch linkage that snaps the deck lid shut so loaded tools, spare tire, and weekend gear stay where they belong. Every Oldsmobile Cutlass utilizes the same basic mechanical action. They consist of a sturdy metal barrel, which is difficult to pry open. The Trunk Lock Cylinder does not require wiring like electronic latches found in more recent nameplates, so even if battery power fails, the driver can quickly lock the cargo with a turn of the key. As pricey fishing tackle, building supplies, or emergency equipment often get left in the trunk, you'd be wise to keep the Trunk Lock Cylinder clean and lubricated to prevent it from sticking and to deter theft. Car owners appreciate the fact that their Oldsmobile Cutlass uses a single keyed Trunk Lock Cylinder. Thus, instead of several complicated mechanisms, it uses only one element. This greatly reduces the chances that they will forget to engage the lock while using it every day.

Each OEM Oldsmobile Cutlass Trunk Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Oldsmobile Cutlass Trunk Lock Cylinder Parts Questions & Experts Answers

Cylinder Kit, Rear Compartment Lid Lock (Uncoded)
15822406
Q: How is the trunk lock cylinder secured to the trunk and how to remove and install it on an Oldsmobile Cutlass?
A:
This lock cylinder is attached to the trunk through the use of two lock nuts and washers or through the use of a retaining ring at the interior surface of the trunk. First of all, get behind the car and release the hinge of the trunk lid and then unscrew the two retaining nuts, washers and guards or unify the retainer around the cylinder. Following that, one will have to uninstall the lock cylinder. When installing the unit the lock cylinder shaft must move and come into contact with the lock.