Which transfer case seals can be replaced without removing the transmission on Oldsmobile Cutlass?

The following oil seals can be replaced without removing the transmission from the car, the speedometer gear seal as well as the extension oil seal. In order to remove the seal of the speedometer gear, first, the car has to be lifted to get access to the link underneath and the car is to be fixed on stands firmly. Remove the cable from the speedometer, then unscrew the lockwasher, bolt and lockplate for the extension, then remove this lockplate. Loosen and then remove the fitting gear and shaft from the extension using a screwdriver then pop out the O-ring. For installation: reverse the information provided under removal procedure, do not forget to lubricate the new seal with transmission lubricant and, thereafter, the pouring of the assembly so that the slot in the fitting is in engages with the lockplate boss on the extension. For the extension oil seal first unbolt the drive shaft and any other items needed for extra space for the seal. Very gently remove the previous seal and ascertain the condition of the counter bore before washing it. Before assembling the new seal to the shaft the spaces between the lips of the new seal should be pre-coated with the transmission lubricants while the outer diameter should be coated with an appropriate sealant. To install the seal, place the lips towards the center and remain in this position until the flange comes into contact with the surface, in the process a tubular spacer can be used. Last but not the least, replace every other component that you might have removed from the vehicle such as the drive shaft.

Genuine Oldsmobile Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

43 Transfer Case Seals found

View related parts
Oldsmobile Seal,Transfer Case Rear Output Shaft
Part Number: 12547638
$80.69 MSRP: $137.98
You Save: $57.29 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Extension Seal, Output Shaft Seal
- Position: Rear
Fits the following Oldsmobile Models:
- Bravada | 1998-2001 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Output Oil
Part Number: 15580225
$21.66 MSRP: $29.77
You Save: $8.11 (28%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Output Shaft Seal
Fits the following Oldsmobile Models:
- Bravada | 1996-1997, 1991-1994 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case (Shaft To Yoke)
Part Number: 12544077
$7.52 MSRP: $10.33
You Save: $2.81 (28%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- Bravada | 1996-2004 | 4 DOOR, BRAVADA | 6 Cyl 4.2L, 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Front Output Shaft
Part Number: 12547478
$13.84 MSRP: $27.91
You Save: $14.07 (51%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Front
Fits the following Oldsmobile Models:
- Bravada | 1998-2001 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Propeller Shaft Front Slip Yoke Oil(Booted)
Part Number: 24232325
$14.58 MSRP: $24.12
You Save: $9.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Rear Bearing Retaining; Extension Housing Seal
- Position: Front
- Replaces: 24201470
Fits the following Oldsmobile Models:
- Bravada | 1996-2004 | 4 DOOR, BRAVADA | 6 Cyl 4.2L, 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Input Shaft
Part Number: 12547466
$51.81 MSRP: $88.60
You Save: $36.79 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- Bravada | 1998-2001 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Input Shaft
Part Number: 14095609
$16.17 MSRP: $25.79
You Save: $9.62 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Output Shaft Seal
Fits the following Oldsmobile Models:
- Bravada | 1996-2001 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Adapter
Part Number: 15969051
$7.91 MSRP: $12.62
You Save: $4.71 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- Bravada | 1996-2004 | 4 DOOR, BRAVADA | 6 Cyl 4.2L, 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Rear Output Shaft
Part Number: 15661460
$26.54 MSRP: $43.93
You Save: $17.39 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Extension Seal
- Position: Rear
Fits the following Oldsmobile Models:
- Bravada | 1996-2001, 1992-1993 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Propeller Shaft Front Slip Yoke Oil
Part Number: 8673526
$6.78 MSRP: $10.80
You Save: $4.02 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SEAL, Transmission Rear Main Bearing; Extension Housing Seal
- Position: Front
Fits the following Oldsmobile Models:
- 98 | 1982-1984 | REGENCY 2 DOOR, REGENCY 4 DOOR, REGENCY BROUGHAM | 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Bravada | 1996-2000, 1991-1994 | BRAVADA | 6 Cyl 4.3L
- Custom Cruiser | 1982-1992 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
- Cutlass | 1982-1988 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Delta 88 | 1982-1985 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 6 Cyl 3.8L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Toronado | 1984 | BROUGHAM | 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View More
View related parts
Oldsmobile Seal,Front Wheel Drive Shaft Oil
Part Number: 97029260
$17.98 MSRP: $29.77
You Save: $11.79 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft
- Position: Front
Fits the following Oldsmobile Models:
- Achieva | 1992-1993 | S 2 DOOR, S 4 DOOR, SL 2 DOOR, SL 4 DOOR | 4 Cyl 2.3L, 6 Cyl 3.3L
- Alero | 2000-2004 | 2 DOOR, 4 DOOR, GL COUPE 2 DOOR, GL SEDAN 4 DOOR, GLS 2 DOOR, GLS COUPE 2 DOOR, GLS SEDAN 4 DOOR, GX 2 DOOR, GX SEDAN 4 DOOR, LEVEL I 2 DOOR, LEVEL I 4 DOOR, LEVEL II COUPE 2 DOOR, LEVEL II SEDAN 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
- Calais | 1985-1990 | 2 DOOR, 4 DOOR, INTERNATIONAL 2 DOOR, INTERNATIONAL 4 DOOR, S 2 DOOR, S 4 DOOR, SL 2 DOOR, SL 4 DOOR, SUPREME 2 DOOR, SUPREME 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.3L
- Cutlass | 1988-1990 | 2 DOOR, 4 DOOR | 4 Cyl 2.3L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.3L
- Firenza | 1983-1988 | 2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAIN BACK HATCHBACK, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 2 DOOR PLAIN BACK, BROUGHAM 4 DOOR, BROUGHAM STATION WAGON, STATION WAGON | 4 Cyl 1.8L, 4 Cyl 2.0L, 6 Cyl 2.8L
View More
View related parts
Oldsmobile Seal,Main Shaft
Part Number: 12549329
$11.20 MSRP: $17.85
You Save: $6.65 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transmission Extension; Extension Housing Seal
Fits the following Oldsmobile Models:
- Bravada | 1996-2001 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Automatic Transmission Case Extension
Part Number: 1358899
$2.62 MSRP: $4.09
You Save: $1.47 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- 98 | 1982-1984 | REGENCY 2 DOOR, REGENCY 4 DOOR, REGENCY BROUGHAM | 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Bravada | 1996-1997, 1991-1994 | BRAVADA | 6 Cyl 4.3L
- Custom Cruiser | 1991-1992, 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel
- Cutlass | 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER | 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Delta 88 | 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 6 Cyl 3.8L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View More
View related parts
Oldsmobile Seal,Transfer Case Rear Output Shaft
Part Number: 88935685
$75.83 MSRP: $120.93
You Save: $45.10 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Extension Seal
- Position: Rear
Fits the following Oldsmobile Models:
- Bravada | 2002-2004 | 4 DOOR | 6 Cyl 4.2L
View related parts
Oldsmobile Seal,Output Shaft
Part Number: 3764601
$5.54
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Propeller Shaft Bearing
Fits the following Oldsmobile Models:
- 98 | 1982-1983 | REGENCY 2 DOOR, REGENCY 4 DOOR, REGENCY BROUGHAM | 6 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Custom Cruiser | 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Cutlass | 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER | 4 Cyl 2.5L, 6 Cyl 3.0L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
- Delta 88 | 1982-1984 | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON | 6 Cyl 3.8L, 8 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View More
View related parts
Oldsmobile Seal,Transfer Case Rear Output Booted
Part Number: 15580329
$29.88 MSRP: $60.24
You Save: $30.36 (51%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case; Output Shaft Seal
- Position: Rear
Fits the following Oldsmobile Models:
- Bravada | 1996-1997, 1992-1994 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal, Transfer Case Rear Output Drive Shaft Housing (O, Ring)
Part Number: 12571298
$13.97 MSRP: $28.18
You Save: $14.21 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Rear
Fits the following Oldsmobile Models:
- Silhouette | 2002-2004 | AWD EXT 2/SLIDING DOORS | 6 Cyl 3.4L
View related parts
Oldsmobile Seal, Transfer Case Rear Output Drive Shaft Oil
Part Number: 12571297
$28.07 MSRP: $56.59
You Save: $28.52 (51%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
- Position: Rear
Fits the following Oldsmobile Models:
- Silhouette | 2002-2004 | AWD EXT 2/SLIDING DOORS | 6 Cyl 3.4L
View related parts
Oldsmobile Seal,Transfer Case Oil Pump
Part Number: 14095611
$7.26 MSRP: $11.42
You Save: $4.16 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- Bravada | 1996-2001, 1994 | BRAVADA | 6 Cyl 4.3L
View related parts
Oldsmobile Seal,Transfer Case Shift Detent Plunger Plug(O Ring)
Part Number: 14071849
Product Specifications
- Other Name: SEAL, Transfer Case
Fits the following Oldsmobile Models:
- Bravada | 1996-2001, 1994 | BRAVADA | 6 Cyl 4.3L

| Page 1 of 3 |Next >

1-20 of 43 Results

Oldsmobile Transfer Case Seal

Looking to acquire brand new parts? Consider exploring our extensive inventory of genuine Oldsmobile Transfer Case Seals. Our offering of OEM Oldsmobile Transfer Case Seals not only comes with competitive prices but also includes a manufacturer's warranty. For added convenience, we provide a hassle-free return policy and rapid delivery service. Shop with confidence on our platform.

Oldsmobile Transfer Case Seal Parts Questions & Experts Answers

Seal,Output Shaft
3764601
Q: Which transfer case seals can be replaced without removing the transmission on Oldsmobile Cutlass?
A:
The following oil seals can be replaced without removing the transmission from the car, the speedometer gear seal as well as the extension oil seal. In order to remove the seal of the speedometer gear, first, the car has to be lifted to get access to the link underneath and the car is to be fixed on stands firmly. Remove the cable from the speedometer, then unscrew the lockwasher, bolt and lockplate for the extension, then remove this lockplate. Loosen and then remove the fitting gear and shaft from the extension using a screwdriver then pop out the O-ring. For installation: reverse the information provided under removal procedure, do not forget to lubricate the new seal with transmission lubricant and, thereafter, the pouring of the assembly so that the slot in the fitting is in engages with the lockplate boss on the extension. For the extension oil seal first unbolt the drive shaft and any other items needed for extra space for the seal. Very gently remove the previous seal and ascertain the condition of the counter bore before washing it. Before assembling the new seal to the shaft the spaces between the lips of the new seal should be pre-coated with the transmission lubricants while the outer diameter should be coated with an appropriate sealant. To install the seal, place the lips towards the center and remain in this position until the flange comes into contact with the surface, in the process a tubular spacer can be used. Last but not the least, replace every other component that you might have removed from the vehicle such as the drive shaft.

Related Oldsmobile Parts

Browse by Model

98 Transfer Case Seal Achieva Transfer Case Seal Alero Transfer Case Seal Aurora Transfer Case Seal Bravada Transfer Case Seal Calais Transfer Case Seal Custom Cruiser Transfer Case Seal Cutlass Transfer Case Seal Delta 88 Transfer Case Seal Firenza Transfer Case Seal Silhouette Transfer Case Seal Toronado Transfer Case Seal