×
My Garage
My Account
My Cart
Genuine Pontiac Fiero Thermostat Housing
Engine Coolant Thermostat HousingEnter your vehicle info to find more parts and verify fitment
- Select Vehicle by VIN
- Select Vehicle by Model
Select by VIN
orEnter your VIN for the most accurate results.Enter your VIN for the most accurate results.
Select by Model
-- Select Make --
-- Select Model --
-- Select Year --
1 Thermostat Housing found
Pontiac Fiero Housing & Flange Asm
Part Number: 10038440- Other Name: HOUSING, Engine Coolant Thermostat; Thermostat Housing
Pontiac Fiero Thermostat Housing Parts Questions & Answers
- Q: How to remove and install the thermostat housing and Thermostat for Pontiac Fiero?A: The thermostat housing is on the upper end of both the 2.5L four-cylinder and 2.8L V6 engines. To remove, twist the thermostat housing cap clockwise, then pull out the thermostat. Clean the housing and lubricate the O-ring with white grease. If replacing the housing or gasket, disconnect the radiator hose (expect some coolant spillage). Disconnect the coolant temperature sensor wire. If replacing the housing, remove the sensor with caution. Remove old gasket residue from the cylinder head. Check the housing for external damage or internal corrosion. Apply RTV sealant to the new gasket and position it. Install the housing, tightening bolts securely. Wrap the sensor threads with Teflon tape, reattach it, and reconnect its wire. Refill with coolant, install the thermostat and its cap. Start the engine and check for leaks.
