Disconnect the cable from the negative terminal of the battery. Remove the center console. Disconnect the end of the
Shift Cable from the shifter pin. Remove and discard the retainer from the shift cable, then lift it free of the shift assembly, ensuring that the clips used are replaced with new ones whenever they're removed, according to the manufacturer. Perform the same sequence to remove the BTSI cable from the shifter. Disconnect the wiring from the shifter. Remove the four mounting nuts, then lift the shifter assembly from its base. To detach the shift lever assembly from the floor, remove these four nuts. Installation is the reverse of removal, and adjust the shift cable and the BTSI cable accordingly.