My Garage
My Account
Cart
Genuine Pontiac G6 Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Ignition Lock Cylinder found
Pontiac G6 Cylinder Kit,Ignition Lock(Uncoded)
Part Number: 20759306$82.53 MSRP: $123.36You Save: $40.83 (34%)Ships in 1-2 Business Days
Pontiac G6 Ignition Lock Cylinder
The Ignition Lock Cylinder in Pontiac G6 vehicles as we all know has the primary purpose of enabling a driver to start an engine through a key turn. This component is installed in the ignition switch while power switch controls the flow of electrical current through circuits that controls the operation of the engine. Unlike some of the other cars which use smart keys with the flip switch mounted on the steering column, the Pontiac G6 has a conventional key column mounted ignition lock cylinder which prevents the car from starting without the right key being inserted into the switch. For the years of production, Pontiac G6 cars have not deviated from this traditional ignition lock cylinder design which employs both a unique key and tumbler to ensure higher level of security. With the improvements in the vehicles' technologies, the car manufacturers have approved the use of keyless ignition systems whereas the Pontiac G6's ignition is a lock cylinder accordingly, yet, like most mechanical structures, it has a tendency to wear out and likely to fail leading to difficult to start the car.
Each OEM Pontiac G6 Ignition Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Pontiac G6 Ignition Lock Cylinder Parts Questions & Experts Answers
- Q: How to remove the Ignition Lock Cylinder and Ignition Switch on Pontiac G6?A:Some of the most important warnings concerning the procedure of the removal of the ignition switch and the Ignition Lock Cylinder replacement are the following. The transponder in the new key has to be programmed by a dealer service department before the engine will start, even if the old key is made into a new cylinder. First of all, take away the knee bolster. That is followed by turning the ignition key which will be located in the Ignition Lock Cylinder till it is switched on and this is marked by a line standing vertically. Immediate removal of the lock cylinder can be done using a 1/8-inch awl or punch where the lock cylinder release tab will be depressed while pulling out the lock cylinder. Regrettably, installation is done in the reverse order of removal. Subsequent to that, unlock and take out the Instrument Cluster, the knee bolster and the instrument panel center trim panel. Remove the nut and connectors of the Ignition switch and the Theft Deterrent Control Module including the theft deterrent control module connector, Ignition switch connector and the Body Control System Interface (BCSI) cable. Plastic air intake take out, separation of the BTSI cable from the ignition switch, screws for the ignition switch and the ignition switch assembly shall also be removed. Continue by taking off the screws of ignition switch mounting bracket, theft deterrent control module and the ignition switch mounting bracket. Last of all, installation can be described as the reversing of the removal process.
