How do you remove the front hub/bearing assembly?

To remove the hub/bearing assembly, loosen the drive axle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jack stands before removing the wheel. Next, remove the brake caliper, caliper mounting bracket, and brake disc from the hub. If the vehicle is equipped with ABS, disconnect the wheel speed sensor harness connector and remove it from the bracket attached to the strut. Remove the drive axle/hub nut and the hub/bearing assembly mounting bolts and remove the hub/bearing assembly from the steering knuckle.

Genuine Pontiac G6 Wheel Hub

Wheel Axle Hub

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

1 Wheel Hub found

View related parts
Pontiac G6 Front Wheel Bearing (W/O Speed Sensor Asm)
Part Number: 22706425
- Other Name: Hub Asm,Front Wheel(W/O Speed Sensor Asm) ; Hub, Front Wheel; Hub & Bearing
- Position: Front
$204.11 MSRP: $404.98
You Save: $200.87 (50%)

Add to Cart
More Info
Fits the following Vehicles:
2005-2007 Pontiac G6 | GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.6L, 6 Cyl 3.9L
Less Info

Pontiac G6 Wheel Hub Parts Questions & Answers

Front Wheel Bearing (W/O Speed Sensor Asm)
22706425
Q: How do you remove the front hub/bearing assembly?
A: To remove the hub/bearing assembly, loosen the drive axle/hub nut and the wheel lug nuts. Then, raise the vehicle and support it securely on jack stands before removing the wheel. Next, remove the brake caliper, caliper mounting bracket, and brake disc from the hub. If the vehicle is equipped with ABS, disconnect the wheel speed sensor harness connector and remove it from the bracket attached to the strut. Remove the drive axle/hub nut and the hub/bearing assembly mounting bolts and remove the hub/bearing assembly from the Steering Knuckle.