Genuine Pontiac Sunbird Body Mount Hole Plug

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Body Mount Hole Plugs found

View related parts
Pontiac Sunbird Plug, Rear Compartment Lid Inner Panel Drain
Part Number: 20375991
$2.85 MSRP: $4.27
You Save: $1.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PLUG, Rear Compartment; Plug, Trunk Lid Hole Plug, Trunk Lid Plug
- Position: Rear Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Pontiac Sunbird | 2 DOOR, GT 2 DOOR, LE 2 DOOR, SE 2 DOOR | 4 Cyl 2.0L, 6 Cyl 3.1L
View related parts
Pontiac Sunbird Plug,Rocker Inner Panel Rear Extension Hole
Part Number: 25652432
Product Specifications
- Other Name: PLUG, Door Trim/Access
- Position: Rear Inner
- Replaces: 21110669, 20749696, 22539445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Pontiac Sunbird | 2 DOOR, GT 2 DOOR, LE 2 DOOR, SE 2 DOOR | 4 Cyl 2.0L, 6 Cyl 3.1L
- 1986-1987 Pontiac Sunbird | 4 DOOR, GT 2 DOOR, GT 4 DOOR, GT CONVERTIBLE, SE 2 DOOR, SE 2 DOOR NOTCHBACK, SE 4 DOOR, SE CONVERTIBLE | 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Pontiac Sunbird Plug, Special (Polyethylene)
Part Number: 15545150
Product Specifications
- Other Name: PLUG, Door Outside Handle; Side Panel Plug
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Pontiac Sunbird | 4 DOOR, LE 4 DOOR | 4 Cyl 2.0L, 6 Cyl 3.1L

Pontiac Sunbird Body Mount Hole Plug

The Body Mount Hole Plug is designed to fit any unused body mount holes beneath the Pontiac Sunbird's floor pan. It can help to block grit, water, and road noise. To install the Body Mount Hole Plug, all you need is a gentle push. It has a flexible polymer lip that expands and grips tightly to ensure a leak-proof fit. It is heat resistant and never needs any grease. Pontiac Sunbird owners trust the vehicle because of such strength. The precise factory sizing ensures that every Body Mount Hole Plug fits into the opening of your Sunbird coupe, hatchback, wagon, sedan, and convertible without the need to use clips or screws. The lightweight polymer that is Body Mount Hole Plug replaces old metal discs, trimming weight while allowing the plug to stay secure through sharp impacts, all reinforcing the Pontiac frame. During spirited Sunbird runs, the expanding skirt stays in close contact with the ground, preventing fumes and heat from entering the cabin and causing damage or rattling the structure. Visual inspections confirm the Body Mount Hole Plug is staying in a seated position and not coming out due to vibrations, temperature swings, and daily bumps. This plug is proof of a rugged design for any Pontiac on the road. One Body Mount Hole Plug fits first and second generation models of Pontiac Sunbird, giving owners a single part that spans early rear drive trims and later J platform models. The Body Mount Hole Plug seals the underbody, aiding in aerodynamics and protecting brake lines. In addition, a safety improvement is achieved through rust control. The Body Mount Hole Plug is compact, tough, easy to install, and temperature tolerant. With a gripping lip that will not loosen, it captures the balanced performance and peace of mind associated with the Pontiac Sunbird.

Each OEM Pontiac Sunbird Body Mount Hole Plug we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.