How do you remove the coolant reservoir?

To remove the coolant reservoir, start by draining the cooling system and disconnecting the battery. Then, unbolt the underhood fuse/relay box and move it aside. Disconnect the expansion tank return hose and air bleed hose, and remove the mounting fasteners for the expansion tank. Disconnect the Low Coolant Level sensor connector and remove the tank. Clean the tank thoroughly and inspect it for cracks, replacing it if necessary. To install the reservoir, simply reverse the removal steps. For models with a coolant reservoir, disconnect the battery and remove the air filter housing/engine cover assembly. Remove the reservoir mounting fastener and take out the reservoir. Installation is the reverse of removal.

Genuine Saturn Ion Coolant Reservoir

Coolant Tank Reservoir

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

2 Coolant Reservoirs found

View related parts
Saturn Ion Tank Asm,Radiator Surge
Part Number: 10368831
- Other Name: TANK, Engine Coolant Recovery; Reservoir, Reservoir Tank
$63.98 MSRP: $95.62
You Save: $31.64 (34%)

Add to Cart
More Info
Fits the following Vehicles:
2003-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
Less Info
View related parts
Saturn Ion Reservoir Assembly, Charging Air Cooler Coolant
Part Number: 25884797
- Other Name: RESERVOIR, Turbocharger/Supercharger Cooling; Reservoir
- Replaces: 22697069
More Info
Fits the following Vehicles:
2004-2007 Saturn Ion | REDLINE 2 DOOR | 4 Cyl 2.0L
Less Info

Saturn Ion Coolant Reservoir Parts Questions & Answers

Tank Asm,Radiator Surge
10368831
Q: How do you remove the coolant reservoir?
A: To remove the coolant reservoir, start by draining the cooling system and disconnecting the battery. Then, unbolt the underhood fuse/relay box and move it aside. Disconnect the expansion tank return hose and air bleed hose, and remove the mounting fasteners for the expansion tank. Disconnect the Low Coolant Level sensor connector and remove the tank. Clean the tank thoroughly and inspect it for cracks, replacing it if necessary. To install the reservoir, simply reverse the removal steps. For models with a coolant reservoir, disconnect the battery and remove the air filter housing/engine cover assembly. Remove the reservoir mounting fastener and take out the reservoir. Installation is the reverse of removal.