Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center

Genuine Saturn LS1 Shift Cable

Transmission Shift Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

  • Saturn LS1 Shift Cable - 90523858
    Saturn LS1 Shift Cable - 90523858
    View related parts

    Saturn LS1 Automatic Transmission Shifter Cable Assembly

    Part Number: 90523858
    $163.95 MSRP: $246.22
    You Save: $82.27 (34%)
    Product Specifications
    • Other Name: Cable Asm,Automatic Transmission Control Indicator Point ; Cable, Transmission Shift Control Cable; Shift Control Cable
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS1 | LS, LS1, LS2, LW1, LW2 | 4 Cyl 2.2L

Saturn LS1 Shift Cable

The Saturn LS1 Shift Cable allows the driver to convert a simple hand movement at the console shifter into an accurate gear change inside the transmission to provide fast and reliable control of the drivetrain. Early automobiles applied direct floor levers or long metal link rods. As seating arrangements changed and consoles became more common, engineers turned to the flexible Shift Cable to snake cleanly through tight spaces without binding. In the LS1 sedan, the Shift Cable pairs the floor mounted selector with the transaxle. The inner steel strands are sheathed in a low friction housing so that every pull or push will pivot the transmission manual lever precisely. A mechanical gate within the shifter helps to prevent accidental range changes, and the Shift Cable itself transmits the force to the gearbox. Over the years, two main styles emerged, one for manual gearboxes with dual cables to shift rails and another single run design for the automatic PRNDL pattern. However, both designs have the same stretch-resistant construction and snap-in console clips. If wear occurs, the driver may notice a sloppy feel, missed gears, or the car refusing to leave Park, clear indications that the Shift Cable has stretched, bent, or broken. Today, Saturn owners have realized the value of a new cable that gives crisp action back to their Saturn LS1 and keeps them ready for daily duty with a feeling that helped make LS1 models famous.

Each OEM Saturn LS1 Shift Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS1 Shift Cable Parts Questions & Experts Answers

  • Saturn LS1 Shift Cable - 90523858 Automatic Transmission Shifter Cable Assembly Automatic Transmission Shifter Cable Assembly
    90523858
    Q: How to disconnect and adjust the shift cable in the event of hard shifting on Saturn LS1?
    A:
    In the event of hard shifting, disconnect the cable at the transaxle and operate the shifter from the driver's seat; if the shift lever moves smoothly through all positions with the cable disconnected, then the cable should be adjusted. To remove and install the shift cable, work inside the vehicle to remove the shift knob retainer and then the knob, followed by pulling up on the shift lever boot until the shift trim bezel disengages from the center console. Disconnect the shift indicator electrical connector and remove the shift trim and boot together, then remove the center console. Use a flat-blade screwdriver to pry the shift cable end from the shift lever pin, then pry the shift cable retaining clip up and away from the shift cable. Depress the tabs on the shift cable while pushing it forward to release it from its bracket on the shift lever assembly, noting its path to the firewall. Raise the hood and place a blanket over the left fender to protect it, then locate the shift lever in the engine compartment near the top of the transaxle. Disconnect the shift cable end by prying it up and away from the shift lever, and depress and hold the two tabs on the shift cable to push it through its bracket. Trace the shift cable to the engine-compartment firewall and pry the large rubber cable grommet from the firewall, then carefully remove the shift cable by pulling it through the hole in the firewall from the engine compartment side. For installation, reverse the removal process, ensuring the shift cable follows its original path and that the cable end fittings are firmly snapped back into place. Confirm that the shift control lever is in the PARK position, detach the shift cable from the transaxle shift lever, and ensure the transaxle shift lever is in PARK. Pry the lock tab up on the shift cable adjustment assembly, reconnect the end of the shift cable to the transaxle shift lever, and push the lock tab back into place. Shift the transaxle into all gear positions to ensure the cable is functioning properly, readjust if necessary, and confirm that the engine only starts in PARK and NEUTRAL.

Related Saturn LS1 Parts

Browse by Year

+
2000 Shift Cable