Cadillac 9433184 Bulb,Rear Seat Roof Illuminate Mirror Lamp

To change the turn signal/parking light bulb, pull the hood release handle, take the bulb holder, turn it anti-clockwise, push the new bulb and turn the holder clockwise. For the earlier models, pull the side marker light bulb in the rear direction to pull out the light housing while for the later models, remove two screws to pull out the side marker housing and replacement of the bulb can be done in the same procedure. For the dome/map light, the lens can be pulled down and released and the bulb pulled straight out; for spotlight-type lamps, pry off the lens, unscrew the lamp and turn the bulb holder anticlockwise to replace the bulb. The instrument panel bulbs have to be accessed by pulling out the holders of the instrument cluster after removing the cluster to change the bulbs. For the replacing of the rear side marker light bulb in earlier models, the light housing has to be slid towards the rear and pulled from the clip while for the later models the two screws have to be unscrewed so as to detach the housing for the bulb to be replaced. In Samurai models, the screws need to be unscrewed to take off the taillight lens, then the bulb should be forced in and then be twisted anti-clockwise for replacement and then re-fixing of the tabs. For 'Sidekick / X-90 / Vitara' and 'Tracker' models, unscrew the housing of the taillight to access the tail, back-up and parking light bulbs; turn the holder anti-clockwise to take it out.