Make sure this part fits

Cadillac 10232545 Switch Assembly, Parking/Neutral Position & Back Up Lamp

1986-1996 Cadillac

Customer Questions & Expert Answers (3)
GM 10232545 Switch Assembly, Parking/Neutral Position & Back Up Lamp
  • Part Description
    SWITCH
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number10232545
    Part DescriptionSWITCH
    Other NamesBack-Up Switch
    Item Dimensions4.3 x 4.2 x 2.2 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU10232545
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1987-1992 Cadillac Brougham8 Cyl 5.0L, 8 Cyl 5.7LBROUGHAM 4 DOOR, BROUGHAM 4 DOOR RWD
    1993-1996, 1986 Cadillac Fleetwood8 Cyl 4.1L, 8 Cyl 5.0L, 8 Cyl 5.7LBROUGHAM, BROUGHAM 4 DOOR, BROUGHAM 4 DOOR RWD
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10232545 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install the neutral safety switch on Cadillac Fleetwood? Posted by Customer
    A:
    Your car's neutral safety switch needs different steps for fixing and putting back together based on if you have a 4T60 or 4T60-E transaxle. Begin by removing the negative cable from the battery, then take off the following parts in particular order: shift linkage, electrical connector, and vacuum hose; undo the attaching nut and pull out the shift lever. After that, detach the fuel line bracket and bolt, then take off the retaining bolts from the switch. Begin install by changing the switch back to its correct position and fastening the retaining bolts to 20 ft. lbs. (27 Nm). You begin by disconnecting the negative battery cable for 4T80-E transaxles, just like the main process, before removing a sequence of parts: air cleaner duct and housing, control cable attached to the manual shaft lever, cable bracket and cable, retaining nut, electrical connector, and hose, then the bolts holding the neutral safety switch. We put the switch back into place while making sure it's adjusted correctly, then screw down the retaining bolts to 12 Nm force and the manual shaft lever nut to 20 ft. lbs. Make sure you adjust the neutral safety switch so the engine starts only in PARK or NEUTRAL, to keep people safe from getting hurt. First, we must loosen the two bolts that hold the switch, turn the hand lever to NEUTRAL, move the switch until a 2.34-mm pin easily fits into the adjustment hole, and fasten the switch bolts carefully.
    Posted by GMPartsGiant Specialist
    Q:
    How to replace the neutral safety switch on Cadillac Fleetwood? Posted by Customer
    A:
    To start the removal and installation of the Neutral Safety Switch on 4T80-E Late Models, set the parking brake and move the gear selector to Neutral. Disconnect the electric plugs from the switch. Remove cable, lever, and then switch. The new neutral range inhibitor switch must be positioned correctly with an alignment tool before moving the transmission from neutral. Check for carrier cracks in needed places. Ensure the engine begins only when in park or neutral and test if the shifter works normally.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10232545, the Right Choice

To ensure reliability, purchase GM part # 10232545 Switch Assembly, Parking/Neutral Position & Back Up Lamp. It is sometimes referred to as Cadillac Automatic Transmission Shift Position Sensor Switch, Cadillac Back Up Light Switch, Cadillac Neutral Safety Switch. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Brougham, Fleetwood models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10232545 Switch Assembly, Parking/Neutral Position & Back Up Lamp. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly