Make sure this part fits

Chevrolet 14046950 Abs Brake Discs

1982-1990 Chevrolet

Customer Questions & Expert Answers (6)
GM 14046950 Abs Brake Discs
  • Part Description
    Disc Assembly, Front Wheel (Finish) ; Rotor, Front And Rear Wheel Brake
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Chevrolet
    Manufacturer Part Number14046950
    Part DescriptionDisc Assembly, Front Wheel (Finish) ; Rotor, Front And Rear Wheel Brake
    Other NamesBrake Rotor, Hub & Rotor, Rotor
    Item Dimensions11.5 x 11.6 x 6.1 inches
    Item Weight11.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU14046950
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1990 Chevrolet Celebrity4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 4.3L Diesel2 DOOR, 4 DOOR, STATION WAGON
    1982-1985 Chevrolet Citation4 Cyl 2.5L, 6 Cyl 2.8L2 DOOR, 2 DOOR NOTCHBACK, 2 DOOR PLAINBACK HATCHBACK, 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 14046950 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install the caliper assembly and Brake Disc on Buick Skylark? Posted by Customer
    A:
    Raise the front of the vehicle and support it on jackstands. Remove the wheel(s). Remove the caliper assembly from the mount. Suspend it with a piece of wire-don't let it hang by the rubber hose. Pull off the rotor. Installation is the reverse of the removal procedure.
    Posted by GMPartsGiant Specialist
    Q:
    What is the Inspection Procedure for a Brake Disc on Buick Century? Posted by Customer
    A:
    Raise the car, support it with jack stands, and remove the wheel and tire assembly. Remove the brake caliper, and support with wire. Remove the dust cap and remove the cotter pin and the bearing retaining nut. Remove the outer wheel bearing and place it in a clean location. Remove the wheel bearing, hub, and disc assembly from the spindle. Installation is in the reverse order of removal. Check the disc for any obvious defects such as excessive rust, chipping, or deep scoring. Make sure there is no wheel bearing play by performing the wheel bearing adjustment procedure. Then, check the disc for run-out by installing a dial indicator on the caliper so that its feeler will contact the disc about one inch below its outer edge. Turn the disc and observe the run-out reading. If the reading exceeds 0.002 in. (0.05mm), replace the disc. Check the caliper thickness with a vernier caliper or other appropriate tool. Minimum thickness dimensions are cast into the disc. Adjust the wheel bearings.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install the caliper assembly and Brake Disc on Oldsmobile Omega? Posted by Customer
    A:
    Raise the front of the vehicle and support it on jackstands. Remove the wheel(s). Remove the caliper assembly from the mount. Suspend it with a piece of wire-don't let it hang by the rubber hose. Pull off the rotor. Installation is the reverse of the removal procedure.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install the caliper assembly and Brake Disc on Pontiac Phoenix? Posted by Customer
    A:
    Raise the front of the vehicle and support it on jackstands. Remove the wheel(s). Remove the caliper assembly from the mount. Suspend it with a piece of wire-don't let it hang by the rubber hose. Pull off the rotor. Installation is the reverse of the removal procedure.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked when a brake drum is removed for lining inspection for the 1983 Oldsmobile Cutlass? Posted by Customer
    A:
    It is essential to check for cracks, scoring, or out-of-round conditions.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Disc
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 14046950, the Right Choice

To ensure reliability, purchase GM part # 14046950 Abs Brake Discs. It is sometimes referred to as Chevrolet Brake Disc. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Celebrity, Citation models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 14046950 Abs Brake Discs. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly