Chevrolet 39084125 Steering Wheel Assembly *Black

You can Select Your Vehicle to check if 39084125 fits your vehicle.

To remove the steering wheel, start by parking the vehicle with the wheels pointing straight ahead and disconnecting the battery. Disable the airbag system and detach the airbag module by inserting a blunt round tool into the holes on each side of the steering wheel. On newer models, remove the steering column covers and push down on the airbag retaining spring. Carefully lift the airbag module away from the steering wheel and disconnect the electrical connectors. Remove the steering wheel bolt and mark the relationship of the steering wheel to the shaft. Feed the wiring harness through the hole in the wheel and remove the steering wheel from the shaft. If necessary, remove the clockspring by unplugging the electrical connectors and sliding the assembly from the steering column. To install the clockspring, ensure it is centered with the arrows aligned on the face. If the shaft was turned, follow the steps to center the clockspring. Install the clockspring on the steering column and secure it with the yellow locking tab or tape. Finally, install the steering wheel, aligning the marks on the shaft and hub, and tighten a new steering wheel bolt. Attach the airbag module and enable the airbag system.