Make sure this part fits

GMC 19299848 Rear Axle Assembly (4.10 Ratio)

2007-2009 GMC

Customer Questions & Expert Answers (7)
GM 19299848 Rear Axle Assembly (4.10 Ratio)
  • Part Description
    Axle Asm,Front (4.10 Ratio) ; Axle, Front Axle And Axle Center
  • Position
    Rear
  • Replaces
    25818425
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number19299848
    Part DescriptionAxle Asm,Front (4.10 Ratio) ; Axle, Front Axle And Axle Center
    Other NamesDifferential Assembly
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25818425
    ManufacturerGeneral Motors
    SKU19299848
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009, 2007 GMC Sierra6 Cyl 4.3L, 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.2LCREW CAB 1/2 TON, EXTENDED CAB 5'8" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 8' BOX 1/2 TON, REGULAR CAB 6'6" BOX 1/2 TON, REGULAR CAB 8' BOX 1/2 TON
    2007-2009 GMC Yukon8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.2LYUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19299848 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you install a full-floating axle shaft for the 2008 Chevrolet Avalanche? Posted by Customer
    A:
    To install a full-floating axle shaft, you should hold the axleshaft level to engage the splines and use a new gasket on the flange. Finally, tighten the flange bolts to the proper torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How is power transmitted from the front differential/axle to the front wheels for the 2007 GMC Sierra? Posted by Customer
    A:
    Power is transmitted through a pair of driveaxles equipped with sliding constant velocity (CV) joints capable of both angular and axial motion.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    Why is it important to inspect the boots periodically for the 2009 GMC Yukon? Posted by Customer
    A:
    It is important to inspect the boots periodically for damage and leaking lubricant, as torn CV joint boots must be replaced immediately to prevent damage to the joints.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    How should the drive axle-to-axle shaft flange bolts be removed for the 2007 Chevrolet Tahoe? Posted by Customer
    A:
    The drive axle-to-axle shaft flange bolts should be removed while having an assistant apply the brake to prevent the driveaxle from turning.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be considered when diagnosing axle problems for the 2007 Chevrolet Silverado? Posted by Customer
    A:
    When diagnosing axle problems, it is important to check for other possible causes such as road or tire noise, and to isolate engine and transmission noises.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What components need to be removed before taking out the rear axle assembly of the 2009 Chevrolet Suburban? Posted by Customer
    A:
    Before removing the rear axle assembly, the following components need to be removed: driveshaft, shock absorbers, vent hose, brake hose, rear brake assemblies, parking brake cables, and rear wheel speed sensors.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19299848, the Right Choice

To ensure reliability, purchase GM part # 19299848 Rear Axle Assembly (4.10 Ratio). It is sometimes referred to as GMC Axle Shaft. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific GMC Sierra, Yukon models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 19299848 Rear Axle Assembly (4.10 Ratio). You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly