Make sure this part fits your vehicle

GMC 25905606 AXLE

2009 GMC Sierra

GM 25905606 AXLE
  • Part Description
    AXLE, Rear Axle
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Customer Questions & Answers
  • Product Specifications

    BrandGenuine GMC
    Manufacturer Part Number25905606
    Part DescriptionAXLE, Rear Axle
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU25905606
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2009 GMC Sierra8 Cyl 6.0L, 8 Cyl 6.6L DieselCREW CAB 1 TON, EXTENDED CAB 1 TON, REGULAR CAB 1 TON

Customer Questions & Answers

Q:
I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
A:
You can Select Your Vehicle to check if 25905606 fits your vehicle.
Posted by GMPartsGiant Specialist
Q:
How do you remove and install components in the front differential for AWD systems for the 2009 Chevrolet Silverado? Posted by Customer
A:
To remove and install components in the front differential for AWD systems, follow these steps: Remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How should the drive axle-to-axle shaft flange bolts be removed for the 2011 GMC Sierra? Posted by Customer
A:
The drive axle-to-axle shaft flange bolts should be removed while having an assistant apply the brake to prevent the driveaxle from turning.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What is the next step after raising on jackstands for the 2008 GMC Sierra? Posted by Customer
A:
The next step is to drain the differential lubricant and remove the differential cover.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What are the initial steps to remove the rear axle assembly from the 2007 Chevrolet Silverado? Posted by Customer
A:
The initial steps are to loosen the rear wheel lug nuts, raise the rear of the vehicle, and support it securely on jackstands.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be considered when diagnosing axle problems for the 2010 Chevrolet Silverado? Posted by Customer
A:
When diagnosing axle problems, it is important to check for other possible causes such as road or tire noise, and to isolate engine and transmission noises.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How are the outer ends of the driveaxles connected to the front hub and bearing assembly for the 2007 Chevrolet Silverado? Posted by Customer
A:
The outer ends of the driveaxles have a stub shaft that is splined to the front hub and bearing assembly and locked in place with a large nut.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done after raising and supporting it on jackstands for the 2011 GMC Sierra? Posted by Customer
A:
After raising the vehicle and supporting it on jackstands, a jack should be positioned under the rear axle differential housing.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What needs to be done after removing the differential cover for the 2007 Chevrolet Silverado? Posted by Customer
A:
After removing the differential cover, you need to remove the pinion shaft lock screw and withdraw the pinion shaft.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done after raising and securing it on jackstands for the 2010 Chevrolet Silverado? Posted by Customer
A:
After raising the vehicle and securing it on jackstands, you should pry off the hub cover and remove the driveaxle/hub nut while bracing the hub to prevent it from rotating.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What type of rear axle assembly does the 2007 GMC Sierra have? Posted by Customer
A:
The vehicle has a hypoid, semi-floating type rear axle assembly.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
What should be done if a CV joint boot is damaged for the 2013 GMC Sierra? Posted by Customer
A:
If a boot is damaged, the CV joint can be disassembled and cleaned, but if any parts are damaged, the entire driveaxle assembly must be replaced as a unit.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
Q:
How do you remove and install components in the front differential for 4WD systems for the 2009 GMC Yukon? Posted by Customer
A:
To remove and install components in the front differential for 4WD systems, follow these steps: Remove the bolts securing the axle tube to the differential carrier and the nuts attaching the tube to its support bracket. Carefully remove the output shaft tube, ensuring no components fall out. Mount the tube in a vise and remove the internal components. Measure and remove the axleshaft bearing using a slide hammer and bearing remover attachment. For installation, install the bearing to the original depth using a bearing driver or socket, then install a new seal and deflector, lubricating the seal lips with grease. Carefully drive in the axleshaft, followed by the internal components. Apply RTV sealant to the tube-to-differential housing mating surface, and install the tube assembly, tightening bolts and nuts to specified torques. Reinstall the driveaxle, front axle shift motor, and fill the differential with lubricant.
Posted by GMPartsGiant Specialist
See expert answers on similar Axle Shaft
If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 25905606, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 25905606 AXLE. It is sometimes referred to as GMC Axle Shaft. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific GMC Sierra models.

Affordable, reliable and built to last, GM part # 25905606 AXLE stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly