Other Name: MOUNT, Engine Mount Dampening; Front Mount, Motor Mount, Mount
Position: Front
Item Weight: 2.60 Pounds
Item Dimensions: 5.9 x 4.7 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 22501573
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 1986 Chevrolet Caprice Submodels:
4 DOOR, BROUGHAM 4 DOOR, CLASSIC 2 DOOR, CLASSIC 4 DOOR, CLASSIC STATION WAGON, STATION WAGON | 8 Cyl 5.0L
1986 Chevrolet Caprice Engine Mount
We are your prime source for competitively priced and high-quality OEM 1986 Chevrolet Caprice Engine Mount. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.
1986 Chevrolet Caprice Parts Questions & Experts Answers
Q: How to Replace Engine Mount and Transmission Mounts in V8 engine on 1986 Chevrolet Caprice?
A: If upon inspection the flexible mounts have become hard, split, or separated from their metal backing, they must be replaced, which can be done with the engine/transmission still in the vehicle. For front mounts, remove the through-bolt and nut, then raise the engine slightly using a hoist or jack with a wood block under the oil pan before removing the mount and frame bracket assembly from the cross member. Install the new mount, secure it with the through-bolt and nut, and tighten all bolts to the specified torque, ensuring the thru-bolt is installed from the rear on the right-hand side mount. For the rear mount, remove the cross member to mount bolts and raise the transmission slightly using a jack. Next, remove the mount to transmission bolts, followed by the mount itself. Install the new mount, lower the transmission, and align the cross member to mount bolts, then tighten all bolts to the specified torque.