My Garage
My Account
Cart
Genuine 1986 Chevrolet El Camino Engine Mount
Engine Motor Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Engine Mounts found
1986 Chevrolet El Camino Motor Mount
Part Number: 22188497$100.33 MSRP: $173.08You Save: $72.75 (43%)Product Specifications- Other Name: Mount; Front Mount, Motor Mount, Mount
- Replaces: 00459021, 14066861, 14039437, 459021, 97102453
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.9 x 5.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22188497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
1986 Chevrolet El Camino Side Mount
Part Number: 22188284$54.01 MSRP: $93.18You Save: $39.17 (43%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Mount; Front Mount, Motor Mount, Mount, Side Mount
- Replaces: 17989409, 22145879, 14082803, 17996145, 22112974, 22146241, 22145863, 17981702
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.0 x 4.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22188284
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: BRACKET, Engine Mounting
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.5 x 5.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10213125
- Warranty: This genuine part is guaranteed by GM's factory warranty.
1986 Chevrolet El Camino Engine Mount
We are your prime source for competitively priced and high-quality OEM 1986 Chevrolet El Camino Engine Mount. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.
1986 Chevrolet El Camino Engine Mount Parts Questions & Experts Answers
- Q:How to Replace Engine Mount and Transmission Mounts in V8 engine on 1986 Chevrolet El Camino?Posted by Micky H.A:If on inspection, the flexible mounts have become hard, split, or separated from their metal backing, they must be replaced. This operation may be carried out with the engine/transmission still in the vehicle. To begin, remove the through-bolt and nut. Raise the engine slightly using a hoist or jack with a wood block under the oil pan, then remove the mount and frame bracket assembly from the crossmember. Install the new mount, secure the through-bolt and nut, and tighten all the bolts to the specified torque. For the rear mount, remove the crossmember to mount bolts and then raise the transmission slightly using a jack. Next, remove the mount to transmission bolts, followed by the mount. Install the new mount, lower the transmission, and align the crossmember to mount bolts before tightening all the bolts to the specified torque.Answered by GM Parts Specialist Fernando / Dec 01, 2025