How to install a one piece rear crankshaft seal in four cylinder engine on 2007 Pontiac G6?

The one piece rear Crankshaft Seal is pressed into the engine block and the crankcase reinforcement section. Begin by removing the transaxle and the driveplate. Pry out the old seal using a seal removal tool or a flat blade screwdriver. To prevent an oil leak after the new seal is installed, be very careful not to scratch or otherwise damage the crankshaft sealing surface or the bore in the engine block. Clean the crankshaft and seal bore in the block thoroughly and degrease these areas by wiping them with a rag soaked in lacquer thinner or acetone. Lubricate the lip of the new seal and the outer diameter of the crankshaft with engine oil. Position the new seal onto the crankshaft, ensuring not to roll over the lip of the seal. If marked, the words THIS SIDE OUT on the seal must face out, toward the rear of the engine. Use a special rear Crankshaft Seal installation tool (GM J42067 or an equivalent) to drive the seal into place. The remainder of installation follows the reverse order of removal.

Genuine 2007 Pontiac G6 Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Crankshaft Seals found

View related parts
2007 Pontiac G6 Seal Assembly, Crankshaft Rear Oil
Part Number: 12591866
$22.22 MSRP: $38.33
You Save: $16.11 (43%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Rear Main Bearing; Rear Main Seal
- Position: Rear
- Replaces: 90298408, 90325572, 90280462, 90354378
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.5 x 4.4 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12591866
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
2007 Pontiac G6 Seal, Crankshaft Front Oil
Part Number: 12584041
$8.90 MSRP: $16.80
You Save: $7.90 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Front Cover & Crankshaft Seal
- Position: Front
- Replaces: 12580989, 55564509, 12609467, 90571925
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.8 x 2.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12584041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
2007 Pontiac G6 Seal,Crankshaft Front Oil
Part Number: 14090906
$21.01 MSRP: $39.63
You Save: $18.62 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Front Cover & Crankshaft Seal
- Position: Front
- Replaces: 12577710
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.0 x 3.0 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 14090906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
2007 Pontiac G6 Seal Assembly, Crankshaft Rear Oil
Part Number: 12592195
$44.32 MSRP: $75.13
You Save: $30.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Engine Rear Main Bearing
- Position: Rear
- Replaces: 14085829
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.3 x 4.1 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12592195
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GT 2 DOOR CONVERTIBLE, GT 2 DOOR NOTCHBACK, GT 4 DOOR NOTCHBACK, GTP 2 DOOR CONVERTIBL, GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK, SE 4 DOOR NOTCHBACK, SE1 2 DOOR NOTCHBACK, SE1 4 DOOR NOTCHBACK | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L
View related parts
2007 Pontiac G6 Seal,Crankshaft Front Oil
Part Number: 12608750
$7.56 MSRP: $12.52
You Save: $4.96 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Front Cover & Crankshaft Seal
- Position: Front
- Replaces: 12592355
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.5 x 3.4 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK | 6 Cyl 3.6L
View related parts
2007 Pontiac G6 Seal Assembly, Crankshaft Rear Oil
Part Number: 12637710
$41.54 MSRP: $71.66
You Save: $30.12 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Engine Rear Main Bearing; Rear Main Seal, Rear Main Seal Retainer
- Position: Rear
- Replaces: 12608748, 12620955, 12592243, 12592242
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.9 x 8.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12637710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Pontiac G6 Submodels:
- GTP 2 DOOR NOTCHBACK, GXP 2 DOOR NOTCHBACK, GXP 4 DOOR NOTCHBACK | 6 Cyl 3.6L

2007 Pontiac G6 Crankshaft Seal

We are your prime source for competitively priced and high-quality OEM 2007 Pontiac G6 Crankshaft Seal. We provide you with parts that will allow you to save a lot of money without sacrificing quality. All our OEM parts are backed by the manufacturer's warranty and shipped out at a swift rate.

2007 Pontiac G6 Parts Questions & Experts Answers

Q: How to install a one piece rear crankshaft seal in four cylinder engine on 2007 Pontiac G6?
A: The one piece rear Crankshaft Seal is pressed into the engine block and the crankcase reinforcement section. Begin by removing the transaxle and the driveplate. Pry out the old seal using a seal removal tool or a flat blade screwdriver. To prevent an oil leak after the new seal is installed, be very careful not to scratch or otherwise damage the crankshaft sealing surface or the bore in the engine block. Clean the crankshaft and seal bore in the block thoroughly and degrease these areas by wiping them with a rag soaked in lacquer thinner or acetone. Lubricate the lip of the new seal and the outer diameter of the crankshaft with engine oil. Position the new seal onto the crankshaft, ensuring not to roll over the lip of the seal. If marked, the words THIS SIDE OUT on the seal must face out, toward the rear of the engine. Use a special rear Crankshaft Seal installation tool (GM J42067 or an equivalent) to drive the seal into place. The remainder of installation follows the reverse order of removal.