How to replace the rack and pinion on Buick Regal?

Raise the intermediate shaft seal and remove the intermediate shaft-to-stub shaft pinch bolt. Remove the air cleaner and disconnect the pressure hoses from the steering gear. Raise and support the vehicle on jackstands, then remove both front wheel and tire assemblies. Remove the cotter pins and nuts from both tie rod ends. Using tool J-6627 or BT-7101 or equivalent, press the tie rod ends from the steering knuckle. If equipped with an air management pipe, remove the bracket bolt from the crossmember. Remove the 2 rear cradle mounting bolts and lower the rear of the cradle about 4-5 inches. If equipped, remove the rack and pinion heat shield. Remove the rack and pinion mounting bolts, then the gear assembly through the left wheel opening. To install, place the gear assembly through the left wheel opening and install the mounting bolts. Install the heat shield. Raise the rear of the cradle and install the mounting bolts. Install the bracket bolt to the crossmember under the air management pipe. Install the tie rod ends to the steering knuckles, install the retaining nuts and insert new cotter pins. Install the front wheels and lower the vehicle. Install the high pressure hoses to the steering gear and install the air cleaner. Finally, install the intermediate shaft seal and the intermediate shaft-to-stub shaft pinch bolt.

Genuine Buick Regal Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Rack And Pinions found

View related parts
Buick Regal Gear Asm,Hydraulic R/Pinion Steering
Part Number: 19330581
$1644.78 MSRP: $3202.12
You Save: $1557.34 (49%)
ADD TO CART
Product Specifications
- Other Name: GEAR ASM,HYD R/PINION STRG; Gear Assembly, Rack, Steering Gear
- Replaces: 22856135, 13271000, 22774358, 23139003
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Assembly, Elec Dual Pinion R/Pinion Strg
Part Number: 84216769
$3454.80 MSRP: $4482.63
You Save: $1027.83 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Motor, Steering Gear
- Replaces: 13376583, 22943369, 13349260, 13366875, 13286690, 23338634, 84271183
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Kit,Steering (Remanufacture)
Part Number: 19330440
$310.57 MSRP: $758.54
You Save: $447.97 (60%)
ADD TO CART
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26079917, 26081812, 88964313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Buick Regal | CUSTOM, LS | 6 Cyl 3.8L
View related parts
Buick Regal Gear Assembly, Elec Belt Drv Rack & Pinion Strg
Part Number: 84494622
$1838.51 MSRP: $2473.53
You Save: $635.02 (26%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack, Steering Gear
- Replaces: 23153513, 22978628, 23459791, 23297470
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Assembly, Steering (W/ Motor)
Part Number: 13366874
$2047.74 MSRP: $2755.51
You Save: $707.77 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaced by: 84216770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Kit, Steering (Partial) (Remanufacture)
Part Number: 26047206
$330.96 MSRP: $624.46
You Save: $293.50 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26042017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Gear Assembly, Elec Dual Pinion Rack & Pinion S
Part Number: 84580634
$791.74 MSRP: $1028.23
You Save: $236.49 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 84580637, 84462327
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Buick Regal Gear Assembly, Electric Belt Drive R/Pinion Steering
Part Number: 23242511
$2192.47 MSRP: $3623.52
You Save: $1431.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 22969531, 84494620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Assembly, Hydraulic R/Pinion Steering
Part Number: 22886743
$376.69 MSRP: $706.79
You Save: $330.10 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: GEAR, Steering; Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick Regal | CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal GEAR ASM,ELEC DUAL PINION RACK & PINION STRG
Part Number: 84216770
$2124.90 MSRP: $2755.51
You Save: $630.61 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaces: 13366874, 13376584, 22943370, 23338635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Assembly, Elec Dual Pinion Rack & Pinion S
Part Number: 84544302
$2069.29 MSRP: $2683.31
You Save: $614.02 (23%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering Gear
- Replaced by: 85621688
- Replaces: 84352219
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Buick Regal GEAR ASM,ELEC DUAL PINION RACK & PINION STRG (REMAN)
Part Number: 19417557
$871.62 MSRP: $1437.40
You Save: $565.78 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal GEAR ASM,ELEC DUAL PINION RACK & PINION STRG (REMAN)
Part Number: 19417556
$1029.15 MSRP: $1698.12
You Save: $668.97 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Assembly, Elec Belt Drv Rack & Pinion Strg
Part Number: 84494624
$2184.08 MSRP: $2819.55
You Save: $635.47 (23%)
Product Specifications
- Other Name: Gear Assembly, Motor, Steering Gear
- Replaces: 22978626, 23459790, 23153512, 23297469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Gear Kit, Steering (Partial) (Remanufacture)
Part Number: 26044821
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 26003943, 26024870
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Buick Regal Gear Kit,Steering (Remanufacture)
Part Number: 26087098
Product Specifications
- Other Name: GEAR, Steering
- Replaces: 7848138, 07848138, 07848140, 7848140, 26033212
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Buick Regal | REGAL | 6 Cyl 3.8L
View related parts
Buick Regal Gear Kit, Steering (Partial) (Remanufacture)
Part Number: 26046146
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26024886
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, REGAL | 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Gear Kit, Steering (Partial) (Remanufacture)
Part Number: 26046144
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Gear Kit,Steering (Remanufacture)
Part Number: 26044830
Product Specifications
- Other Name: GEAR KIT, Steering; Gear Assembly, Steering Gear
- Replaces: 26035402, 26024892, 26046142
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1994 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, REGAL | 6 Cyl 2.8L, 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Gear Kit,Steering (Remanufacture)
Part Number: 26087072
Product Specifications
- Other Name: GEAR, Steering; Gear Assembly, Steering Gear
- Replaces: 07833143, 7833143
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel

| Page 1 of 2 |Next >

1-20 of 29 Results

Buick Regal Rack And Pinion

The Rack And Pinion in Buick Regal vehicles is a high-precision device that convert the rotary motion of the steering wheel into the linear motion of the front wheels. This mechanism mainly occurs through a rack and pinion technique in which the pinion engages the rack that is fitted in a metallic tube to enable the steering control. Buick Regal models over the years have generally used mechanical power assist type of steering system, namely rack and pinion type that makes the steering easier through hydraulics. Earlier models of cars including compact cars used manual racks, but present generation Buick Regal employs hydraulic power racks with the help of pressurized fluid in order to aid in the task of steering. There are different types of gears based on the design like straight and helical racks, straight racks are usually preferred due to their efficiency and lower operational temperatures. Problems with internal and external leakage, wear and tear of the gears within the Rack And Pinion and Damaged seals all arrive at expressive limitations in the multiple performance of the car's steering, where the steering turns match the viscosity of cement or extremely flexible such that any gentle force or shock from the road could be transferred to the wheels. This make it important for there to be regular maintenance on the Rack And Pinion so that it fulfills its required function in Buick Regal cars.

Each OEM Buick Regal Rack And Pinion we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Regal Rack And Pinion Parts Questions & Experts Answers

Gear Kit, Steering (Partial) (Remanufacture)
26044821
Q: How to replace the rack and pinion on Buick Regal?
A: Raise the intermediate shaft seal and remove the intermediate shaft-to-stub shaft pinch bolt. Remove the air cleaner and disconnect the pressure hoses from the steering gear. Raise and support the vehicle on jackstands, then remove both front wheel and tire assemblies. Remove the cotter pins and nuts from both Tie Rod Ends. Using tool J-6627 or BT-7101 or equivalent, press the tie rod ends from the Steering Knuckle. If equipped with an air management pipe, remove the bracket bolt from the crossmember. Remove the 2 rear cradle mounting bolts and lower the rear of the cradle about 4-5 inches. If equipped, remove the rack and pinion heat shield. Remove the rack and pinion mounting bolts, then the gear assembly through the left wheel opening. To install, place the gear assembly through the left wheel opening and install the mounting bolts. Install the heat shield. Raise the rear of the cradle and install the mounting bolts. Install the bracket bolt to the crossmember under the air management pipe. Install the tie rod ends to the steering knuckles, install the retaining nuts and insert new cotter pins. Install the front wheels and lower the vehicle. Install the high pressure hoses to the steering gear and install the air cleaner. Finally, install the intermediate shaft seal and the intermediate shaft-to-stub shaft pinch bolt.