Where is the MAP sensor located and How to its removal and installation on Cadillac Escalade?

MAP sensor is installed on the top of the intake manifold behind the throttle body on its left side. Start by disconnecting the electrical connection and taking off the mounting bolt, then get the sensor off the manifold in an upward motion. Remove the sealing grommet situated in the sensor to check the condition of the sealing grommet; you are able to notice crack, tearing, or wearing of the sealing grommet then it has to be replaced. When fitting the new sensor use a little cleaning engine oil on the grommet to avoid tearing of the grommet. The installation process cannot be done otherwise but after the removal process has been done in the reverse order. Also, it is possible to take off the intake manifold cover and, once again, disconnect the electrical connector. To do it, unbolt the MAP sensor retainer, and gently pull on both ends of the retainer to snap it off and free the sensor. If access is possible, you may remove an old grommet; examine it and replace if necessary. Make sure that the retainer fits well in the installation process and this procedure is done in the reverse of the removal process.

Genuine Cadillac Escalade MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 MAP Sensors found

View related parts
Cadillac Escalade Sensor Assembly, Map
Part Number: 12711681
$46.40 MSRP: $94.64
You Save: $48.24 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 12694725, 12644228, 12594942, 12701247
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2024 Cadillac Escalade | 1/2 TON, 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, 4 DOOR 1/2 TON, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
Cadillac Escalade SENSOR ASM,MAP
Part Number: 19418812
$91.15 MSRP: $185.96
You Save: $94.81 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor
- Replaces: 12623671, 09373269, 12215049, 9373269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade | 3/4 TON, EXT 3/4 TON
View related parts
Cadillac Escalade SENSOR ASM,MAP
Part Number: 19418808
$73.03 MSRP: $125.98
You Save: $52.95 (43%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: M.A.P. Sensor, Map Sensor, Valve Assembly
- Replaces: 16249939, 09359409, 12614973, 16187556, 9359409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2008 Cadillac Escalade | 1/2 TON, 3/4 TON, EXT 1/2 TON, EXT 3/4 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L, 8 Cyl 6.2L
- 1999-2000 Cadillac Escalade | 1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L
View related parts
Cadillac Escalade SENSOR ASM,MAP
Part Number: 19418810
$70.00 MSRP: $142.80
You Save: $72.80 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 09350899, 12580698, 12615136, 9350899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Cadillac Escalade | EXT 3/4 TON
View related parts
Cadillac Escalade Sensor Asm,Barometric Pressure
Part Number: 19207559
$70.00 MSRP: $142.78
You Save: $72.78 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors
- Replaces: 97180655
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Cadillac Escalade | 3/4 TON, EXT 3/4 TON
View related parts
Cadillac Escalade Sensor Assembly, Int Air Press & Temp
Part Number: 24000470
$14.29 MSRP: $22.79
You Save: $8.50 (38%)
ADD TO CART
Product Specifications
- Other Name: Boost Sensor, M.A.P. Sensor, Map Sensor
- Replaces: 55505514
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel

Cadillac Escalade MAP Sensor

The MAP Sensor in Cadillac Escalade needs to monitor the positive pressure inside the intake manifold and is one of the vehicles' parts. It sends information to the engine control unit (ECU) so that it can regulate fuel injectors based on air quantity existing in the cylinders so as to intensify air and fuel mix in the combustion process. The Cadillac Escalade naturally aspirated engine models typically incorporate the MAP Sensor whereas forced induction engines may simultaneously use the MAP as well as the mass airflow (MAF) Sensor. The primary uniqueness of the MAP Sensor is that it measures pressure in as a single value, unlike the boost sensors that measure pressure above a given limit. This functionality is essential for effectual fuel measuring, ignition timing and general improvement of Cadillac Escalade automobiles' performance.

Each OEM Cadillac Escalade MAP Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Cadillac Escalade MAP Sensor Parts Questions & Experts Answers

Sensor Assembly, Map
12711681
Q: Where is the MAP sensor located and How to its removal and installation on Cadillac Escalade?
A:
MAP sensor is installed on the top of the intake manifold behind the throttle body on its left side. Start by disconnecting the electrical connection and taking off the mounting bolt, then get the sensor off the manifold in an upward motion. Remove the sealing grommet situated in the sensor to check the condition of the sealing grommet; you are able to notice crack, tearing, or wearing of the sealing grommet then it has to be replaced. When fitting the new sensor use a little cleaning engine oil on the grommet to avoid tearing of the grommet. The installation process cannot be done otherwise but after the removal process has been done in the reverse order. Also, it is possible to take off the intake manifold cover and, once again, disconnect the electrical connector. To do it, unbolt the MAP sensor retainer, and gently pull on both ends of the retainer to snap it off and free the sensor. If access is possible, you may remove an old grommet; examine it and replace if necessary. Make sure that the retainer fits well in the installation process and this procedure is done in the reverse of the removal process.