Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Slave Cylinder
$226.96MSRP: $394.99
You Save: $168.03 (43%)
Add to Cart
More Info
Fits the following Vehicles:
2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Slave Cylinder
Replaced by: 24279812
$333.80MSRP: $527.47
You Save: $193.67 (37%)
Add to Cart
More Info
Fits the following Vehicles:
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 2LT, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 2LT | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
A: At the start of taking out the transmission, remove the quick-disconnect line bolt on the clutch slave cylinder for Aisin transmission models. On Tremec ones, undo the fitting at the tip of clutch line and withdraw it from clutch slave cylinder, blocking its end to prevent contamination. Remove clutch slave cylinder mounting bolts as well as clutch slave cylinder assembly if equipped with o-ring. To put back in place, start by putting new o-ring behind Aisin model's clutch slave cylinder. Tighten up the clutch slave cylinder into position until you hear a click for Aisin models. For Tremec types, cautiously screw in the clutch line fitting into the clutch slave cylinder with no thread damage. Install and tighten down bolts on clutch slave cylinders as per specified torque value. The bolt used to connect quick-disconnect of Aisin models' clutches shall be installed and torqued accordingly. Lastly, install transmission; check brake fluid level in reservoir while adding any necessary fluid; bleed system and again verify brake fluid in reservoir before starting engine.