How to remove and install the Dimmer Switch and Hazard Warning Switch on Chevrolet Corvette?

For the hazard flasher switch, on 2000 and earlier models, it is part of the multi-function switch, which requires removal of that switch. For 2001 to 2004 models, first remove the upper instrument panel trim, then take out the air duct and center duct section from the instrument panel trim area, depress the plastic clips inward to remove the hazard switch from the upper instrument panel, and disconnect the electrical connector, with installation being the reverse of removal. For 2005 and later models, remove the center console trim panel, press the side tabs of the hazard switch toward the center, and push the switch through, with installation being the reverse of removal. Regarding the fog lamp switch, if it is separate, use a small flat lip screwdriver to pry between the lower edge of the switch and the dash to release the clip, pull the switch toward the driver's seal, disconnect the electrical connector, and reinstall in reverse order. The HUD/instrument panel dimmer switch is part of the instrument panel dimmer switch, requiring removal of the instrument cluster, followed by disconnecting the HUD switch electrical connector and the driver's information center electrical connector, removing the instrument cluster from the instrument panel, taking off the instrument panel bezel, and removing the instrument panel dimmer/HUD switch, with installation being the reverse of removal. For the driver's information switch, first remove the instrument cluster, then take off the instrument cluster bezel, remove the retaining screws for the driver's information switch, take the switch from the back of the bezel, and reinstall in reverse order.

Genuine Chevrolet Corvette Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Dimmer Switches found

View related parts
Chevrolet Corvette Switch Assembly, Turn Signal & Headlamp & Headlamp Dimmer & Fog
Part Number: 20808029
$70.35 MSRP: $119.93
You Save: $49.58 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Turn Signal Lamp; Combination Switch, Turn Signal Switch
- Replaces: 01999391, 1999391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Switch Assembly, Steering Column Dimmer
Part Number: 26019660
$50.12 MSRP: $74.92
You Save: $24.80 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Headlamp Dimmer; Dimmer Switch, Headlamp Dimmer Switch, Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch,Dimmer
Part Number: 26035239
$7.65 MSRP: $14.44
You Save: $6.79 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Headlamp Dimmer; Dimmer Switch, Headlamp Dimmer Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch Assembly, Instrument Panel Lamp Dimmer *Black
Part Number: 22779853
$21.03 MSRP: $33.07
You Save: $12.04 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Headlamp Dimmer; Dimmer Switch
- Replaced by: 23388937
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Switch Assembly, Dimr *Black
Part Number: 84865083
$19.11 MSRP: $28.57
You Save: $9.46 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Dimmer Switch, Instrument Light Rheostat
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Switch Assembly, Dimr
Part Number: 23366559
$32.75 MSRP: $48.95
You Save: $16.20 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Dimmer Switch, Instrument Light Rheostat
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020 Chevrolet Corvette | Stingray Convertible, Stingray Coupe | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Dimmer, Instrument Panel Lamp
Part Number: 1995263
Product Specifications
- Other Name: DIMMER, Instrument Panel/Interior Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Switch Assembly, Headlamp & Instrument Panel Lamp Dimmer & Accessory & E
Part Number: 10210758
Product Specifications
- Other Name: SWITCH, Headlamp/Fog Lamp/Turn Signal; Headlamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L

Chevrolet Corvette Dimmer Switch

The Dimmer Switch in Chevrolet Corvette cars plays an essential function of controlling the lights of the vehicle depending on the driving environment. In the first place, it is for switching light from high and low beam while driving at night or in areas with poor visibility or in bad weather condition. Moreover, in the vehicle there is the Dimmer Switch responsible for turning on the night lights for the interior of the car which increases the usability inside the car. From the years, Chevrolet Corvette could have had one or the other types or styles of Dimmer Switches and the differences are not clearly made known in the details given above. Every type of Dimmer Switch would promptly conform to the initial directives of controlling the condition of the headlighting and the activation of inside lighting fixture. Knowledge of these mechanisms will help to preserve proper functioning of light equipment in Chevrolet Corvette automobiles as well as control the reactions of the Dimmer Switch to the requirements of various driving modes.

Each OEM Chevrolet Corvette Dimmer Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Corvette Dimmer Switch Parts Questions & Experts Answers

Switch Assembly, Turn Signal & Headlamp & Headlamp Dimmer & Fog
20808029
Q: How to remove and install the Dimmer Switch and Hazard Warning Switch on Chevrolet Corvette?
A:
For the hazard flasher switch, on 2000 and earlier models, it is part of the multi-function switch, which requires removal of that switch. For 2001 to 2004 models, first remove the upper instrument panel trim, then take out the air duct and center duct section from the instrument panel trim area, depress the plastic clips inward to remove the hazard switch from the upper instrument panel, and disconnect the electrical connector, with installation being the reverse of removal. For 2005 and later models, remove the center console trim panel, press the side tabs of the hazard switch toward the center, and push the switch through, with installation being the reverse of removal. Regarding the fog lamp switch, if it is separate, use a small flat lip screwdriver to pry between the lower edge of the switch and the dash to release the clip, pull the switch toward the driver's seal, disconnect the electrical connector, and reinstall in reverse order. The HUD/instrument panel dimmer switch is part of the instrument panel dimmer switch, requiring removal of the Instrument Cluster, followed by disconnecting the HUD switch electrical connector and the driver's information center electrical connector, removing the instrument cluster from the instrument panel, taking off the instrument panel bezel, and removing the instrument panel dimmer/HUD switch, with installation being the reverse of removal. For the driver's information switch, first remove the instrument cluster, then take off the instrument cluster bezel, remove the retaining screws for the driver's information switch, take the switch from the back of the bezel, and reinstall in reverse order.