How to remove and install a front wheel hub and bearing assembly on Chevrolet Corvette?

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Remove the brake disc and disconnect the ABS wheel speed sensor connector. For 2008 and earlier models, disconnect the stabilizer bar link from the control arm, then support the lower control arm with a jack and separate the ball joint from the steering knuckle. For 2009 and later models, remove the steering knuckle. Remove the three hub mounting bolts from the backside of the steering knuckle and take out the hub and bearing assembly. Installation is the reverse of removal, ensuring the mating surfaces on the knuckle and the hub and bearing assembly are clean before installation, tightening the mounting bolts to the specified torque, installing the brake disc and caliper, and finally installing the wheel and wheel lug nuts. Lower the vehicle and tighten the nuts to the specified torque.

Genuine Chevrolet Corvette Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Wheel Hubs found

View related parts
Chevrolet Corvette Front Wheel Bearing (W/ Bearing)
Part Number: 20981829
$115.88 MSRP: $227.88
You Save: $112.00 (50%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/ Bearing); Front Hub & Bearing, Hub & Bearing
- Position: Front
- Replaced by: 85144278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Front Wheel Bearing (W/ Bearing & Wheel Speed Sensor)
Part Number: 22804376
$271.26 MSRP: $528.78
You Save: $257.52 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/ Bearing & Wheel Speed Sensor)
- Position: Front
- Replaced by: 19421347
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Rear Wheel Bearing (W/ Bearing)
Part Number: 23193306
$125.09 MSRP: $236.02
You Save: $110.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel (W/ Bearing); Hub & Bearing, Hub & Bearing Assembly
- Position: Rear
- Replaced by: 85144277
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette BEARING ASM,FRT WHL
Part Number: 19421349
$234.83 MSRP: $457.77
You Save: $222.94 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 19208046, 19208047, 13588035
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette HUB ASM-FRT WHL (W/ BRG)
Part Number: 87833622
$103.17 MSRP: $194.66
You Save: $91.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, STINGRAY CONVERTIBLE, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HUB ASM-FRT WHL (W/ BRG)
Part Number: 87833625
$112.40 MSRP: $212.08
You Save: $99.68 (47%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly
- Replaces: 85150737
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | LT6 CONVERTIBLE, LT6 COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HUB ASM-RR WHL (W/ BRG)
Part Number: 86812988
$99.10 MSRP: $186.98
You Save: $87.88 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 87841988
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HUB ASM-RR WHL (W/ BRG)
Part Number: 84362968
$106.20 MSRP: $200.38
You Save: $94.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 87841987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HUB ASM-RR WHL (W/ BRG)
Part Number: 86812989
$118.84 MSRP: $214.12
You Save: $95.28 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Hub & Bearing
- Replaced by: 87833624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Rear Wheel Bearing (W/ Bearing & Wheel Speed Sensor)
Part Number: 88967288
Product Specifications
- Other Name: Hub Asm,Rear Wheel (W/ Bearing & Wheel Speed Sensor) ; Hub, Rear Wheel
- Position: Rear
- Replaces: 07470571, 7470571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2008 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Front Suspension, Hub & Bearing
Part Number: 88967287
Product Specifications
- Other Name: Hub Asm,Front Wheel (W/ Bearing & Wheel Speed Sensor) ; Hub, Front Wheel
- Position: Front
- Replaces: 07470569, 7470569
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2008 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE, NOTCHBACK | 8 Cyl 5.7L, 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Air Conditioner Wheel Hub
Part Number: 12413041
Product Specifications
- Other Name: Hub Asm,Front Wheel ; Hub, Front Wheel; Hub
- Replaces: 7470551, 07470551
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Hub Assembly, Front Whl (W/ Brg)
Part Number: 84992878
$90.46 MSRP: $162.26
You Save: $71.80 (45%)
Product Specifications
- Position: Front
- Replaces: 23291487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hub Assembly, Rear Whl (W/ Brg)
Part Number: 23291488
$93.37 MSRP: $167.48
You Save: $74.11 (45%)
Product Specifications
- Other Name: Hub Assembly, Rear Hub & Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2023 Chevrolet Corvette | LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Rear Wheel Bearing
Part Number: 7470501
Product Specifications
- Other Name: Hub Asm,Rear Wheel ; Hub, Rear Wheel; Hub, Hub & Bearing
- Position: Rear
- Replaces: 7466945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette Air Conditioner Wheel Hub
Part Number: 12413001
Product Specifications
- Other Name: Hub Asm,Front Wheel ; Hub, Front Wheel; Hub, Hub & Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L

Chevrolet Corvette Wheel Hub

Chevrolet Corvette cars' Wheel Hub works as a link between the wheels and the car that provides safer controlling of steering as well as stability. It contains hubs, bearings, sensors, brake system and other parts which help in smooth rotation of wheel and firm fixing of the same. The Chevrolet Corvette has gone through the use of different Wheel Hub designs up to date, with each design have its unique characteristic such as bolt patterns and axle extension width among others. Some basic choices are produced but specially designed replacements that are direct-fit to the Corvette are preferred. Its installation process is very crucial because torque is applied properly during its fixations so that mechanical problems do not happen, thus proving the relevance of the Wheel Hub which enhances the Corvette's operational capability on the road.

Each OEM Chevrolet Corvette Wheel Hub we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Corvette Wheel Hub Parts Questions & Experts Answers

Front Wheel Bearing (W/ Bearing & Wheel Speed Sensor)
22804376
Q: How to remove and install a front wheel hub and bearing assembly on Chevrolet Corvette?
A:
Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Remove the brake disc and disconnect the ABS wheel speed sensor connector. For 2008 and earlier models, disconnect the stabilizer bar link from the Control Arm, then support the lower control arm with a jack and separate the ball joint from the Steering Knuckle. For 2009 and later models, remove the steering knuckle. Remove the three hub mounting bolts from the backside of the steering knuckle and take out the hub and bearing assembly. Installation is the reverse of removal, ensuring the mating surfaces on the knuckle and the hub and bearing assembly are clean before installation, tightening the mounting bolts to the specified torque, installing the brake disc and caliper, and finally installing the wheel and wheel lug nuts. Lower the vehicle and tighten the nuts to the specified torque.