What steps should be followed to replace the oil pan without raising the engine in V6 engine on Chevrolet El Camino?

In most cases, the engine will not need to be raised, which will greatly ease the procedure, so inspect the pan clearance before beginning. Start by disconnecting the negative battery cable, then raise the car and support it firmly on jack stands. Drain the engine oil into a suitable container and remove the automatic transmission flex plate lower cover if equipped. Disconnect the exhaust crossover pipe at the manifolds, then remove the oil pan attaching bolts and take off the oil pan. Clean the pan thoroughly with the proper solvent, ensuring that the gasket surfaces on the block and pan are clean, smooth, and free of old gasket material. Apply sealer to the new oil pan gasket in several places and install it on the pan, making certain that the bolt holes line up. Finally, install the oil pan and pan bolts, torque-tightening the bolts to specifications.

Genuine Chevrolet El Camino Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Pans found

View related parts
Chevrolet El Camino Pan,Automatic Transmission Oil (Remanufacture)
Part Number: 24202236
Product Specifications
- Other Name: PAN, Transmission Oil
- Replaces: 08648349, 8648349
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet El Camino Pan,Automatic Transmission Oil
Part Number: 8657035
Product Specifications
- Other Name: PAN, Transmission Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L, 6 Cyl 4.3L, 8 Cyl 4.4L, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Chevrolet El Camino Pan Assembly, Oil
Part Number: 14081203
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1984 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L
View related parts
Chevrolet El Camino Pan,Oil
Part Number: 25522386
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Replaces: 12360301
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1985 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 6 Cyl 3.8L
View related parts
Chevrolet El Camino Pan Assembly, Oil
Part Number: 555137
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1987 Chevrolet El Camino | EL CAMINO, MONTE CARLO
View related parts
Chevrolet El Camino Pan,Oil
Part Number: 14082348
Product Specifications
- Other Name: PAN, Engine Oil; Oil Pan
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1986 Chevrolet El Camino | CLASSIC 4 DOOR, CLASSIC STATION WAGON, EL CAMINO, MONTE CARLO | 8 Cyl 4.4L, 8 Cyl 5.0L

Chevrolet El Camino Oil Pan

The Oil Pan of Chevrolet El Camino vehicles also has the function of an oil reservoir for circulation of the engine oil throughout the engine and cooling of the parts. In wet sump system as is common with most El Camino models, there is an oil pan in which oil is collected after it has been drawn through a pickup tube by an oil pump, after circulating all through the engine, it returns to the pan. Such design facilitates adequate supply of oil in the oil pan for different operations of the vehicle. Traditionally the oil pans of Chevrolet El Camino were produced using stamped steel, although more recent models use cast aluminum to provide better performance. Although the purpose of intake manifold is not altered largely it was subjected to a shift in the material for construction that was due to the evolution in the models of engines and their efficiency levels.

Each OEM Chevrolet El Camino Oil Pan we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet El Camino Oil Pan Parts Questions & Experts Answers

Pan Assembly, Oil
14081203
Q: What steps should be followed to replace the oil pan without raising the engine in V6 engine on Chevrolet El Camino?
A:
In most cases, the engine will not need to be raised, which will greatly ease the procedure, so inspect the pan clearance before beginning. Start by disconnecting the negative battery cable, then raise the car and support it firmly on jack stands. Drain the engine oil into a suitable container and remove the automatic transmission flex plate lower cover if equipped. Disconnect the exhaust crossover pipe at the manifolds, then remove the oil pan attaching bolts and take off the oil pan. Clean the pan thoroughly with the proper solvent, ensuring that the gasket surfaces on the block and pan are clean, smooth, and free of old gasket material. Apply sealer to the new oil pan gasket in several places and install it on the pan, making certain that the bolt holes line up. Finally, install the oil pan and pan bolts, torque-tightening the bolts to specifications.