How to remove and reinstall the oil pump assembly in 2.4L four cylinder engine on Chevrolet Equinox?

Before reconizing the oil pump assembly, you have to first drain the engine oil and then take off the drivebelt. Yes it is true, that one has to loosen the right-front wheel lug nuts, then proceed to raise the front of the vehicle and support it on jackstands and finally be able to remove the right front wheel. then unbolt the engine front cover, now working at the backside of the engine front cover, turn the oil pump cover screws simultaneously in anti-clockwise manner until all of the screws are loose and then you can take off the cover and both the gears of the oil pump. Make a note of any identifying features on the rotors and pull them out of the pump body and if necessary mark them in the correct position for reuse. It is recommended to clean and dry all of the parts; the rotors must be checked for signs of wear or damage; if any of the components are scored or damaged, the entire oil pump assembly must be replaced. Using a feeler gauge verify the clearances, the components are acceptable; immerse the rotors in clean engine oil; and insert the rotors into pump body correctly orientated with the ID Marks. Take out and if necessary replace the oil pressure relief valve parts from the front cover and then put back in its respective position. Place the rotors into the housing with the inner rotor hub towards the engine front cover in order to be properly installed so they can be securely fastened. Fit the oil pump cover and screws in a slow step by step with the torque prescribed then fit the oil pressure relief valve parts. Last but not the least, put back the engine front cover, add a fresh oil into the engine and put in another new oil filter. Switch on the engine and examine the tightly for signs of leakage and make sure that the oil pressure goes up to normal; if they fail to get normal or abnormal rise the engine be switched off to avert any heavy losses.

Genuine Chevrolet Equinox Oil Pump

Oil Fluid Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Oil Pumps found

View related parts
Chevrolet Equinox Pump,Oil
Part Number: 12640448
$147.68 MSRP: $250.33
You Save: $102.65 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Engine Oil Pump; Oil Pump, Water Pump
- Replaces: 12590152, 12584298, 12590016
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Chevrolet Equinox | LT SUV, LTZ SUV, SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Pump Asm,Oil
Part Number: 89060444
$126.74 MSRP: $174.27
You Save: $47.53 (28%)
ADD TO CART
Product Specifications
- Other Name: PUMP, Engine Oil Pump; Oil Pump, Water Pump
- Replaces: 10229785, 12593581
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L
View related parts
Chevrolet Equinox Pump Assembly, Automatic Transmission Fluid
Part Number: 24256952
$251.97 MSRP: $432.88
You Save: $180.91 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Transmission Oil Pump
- Replaces: 24243648
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L
View related parts
Chevrolet Equinox Pump Assembly, Automatic Transmission Fluid
Part Number: 24289058
$208.59 MSRP: $356.69
You Save: $148.10 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, A/Trns Fluid
- Replaces: 24283150, 24265320, 24047152, 24287535, 24278764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.6L Diesel
View related parts
Chevrolet Equinox Pump Assembly, Oil & P/B Boos
Part Number: 55509127
$269.09 MSRP: $429.17
You Save: $160.08 (38%)
ADD TO CART
Product Specifications
- Other Name: Oil Pump
- Replaces: 55487858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.6L Diesel
View related parts
Chevrolet Equinox Pump Assembly, Oil
Part Number: 12674460
$114.27 MSRP: $197.10
You Save: $82.83 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PUMP, Engine Oil Pump; Oil Pump
- Replaces: 12627211
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 2.0L
View related parts
Chevrolet Equinox PUMP ASM-OIL (W/ SCRN)
Part Number: 12706714
$125.37 MSRP: $199.95
You Save: $74.58 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump
- Replaced by: 25205038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L
View related parts
Chevrolet Equinox PUMP ASM-OIL
Part Number: 12724336
$99.02 MSRP: $157.89
You Save: $58.87 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Oil Pump
- Replaced by: 12741330
- Replaces: 55509155
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 2.0L
View related parts
Chevrolet Equinox PUMP ASM-A/TRNS FLUID (W/O DRVTRN & FILTER)
Part Number: 24043459
$206.39 MSRP: $326.14
You Save: $119.75 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L
View related parts
Chevrolet Equinox Pump Assembly, A/Trns Fluid (W/O Filter & Drvtrn)
Part Number: 24042236
$237.60 MSRP: $378.86
You Save: $141.26 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly
- Replaced by: 24052579
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022 Chevrolet Equinox | 4 DOOR LT, 4 DOOR LTZ | 4 Cyl 2.0L
- 2018-2020 Chevrolet Equinox | 4 DOOR LT, 4 DOOR LTZ | 4 Cyl 2.0L
View related parts
Chevrolet Equinox PUMP ASM-A/TRNS FLUID (W/O DRVTRN & FILTER)
Part Number: 24043453
$215.06 MSRP: $339.84
You Save: $124.78 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 24052725
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.6L Diesel
View related parts
Chevrolet Equinox PUMP KIT,A/TRNS FLUID (W/TURBINE SHAFT)
Part Number: 24047151
$516.55 MSRP: $820.13
You Save: $303.58 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 24059637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L

Chevrolet Equinox Oil Pump

It is on this premise that the Oil Pump in Chevrolet Equinox vehicles heavily contributes to the functionality of the internal combustion engines. It is held responsible for supplying pressurized oil for lubrication and cooling of such vital parts as bearings and piston. Conventional mechanically driven oil pumps in the form of those spun through crankshaft or camshaft are usually employed in the Chevrolet Equinox and are considered to be highly dependable. The types of oil pumps that are used in Equinox may change from year to year with gear, trochoid and vane pumps being common. The oiling system pumps the oil from the sump and passes it through a series of filters and coolers before distributing it with oil pressure being critical to an engine. This is because different parts in the system require to be serviced often, such as the oils and filters, to reduce incidences of blocks, and other problems affecting oil pressure which is so critical on the Chevrolet Equinox engine and hence assurance of its durability.

Each OEM Chevrolet Equinox Oil Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Equinox Oil Pump Parts Questions & Experts Answers

Pump,Oil
12640448
Q: How to remove and reinstall the oil pump assembly in 2.4L four cylinder engine on Chevrolet Equinox?
A: Before reconizing the oil pump assembly, you have to first drain the engine oil and then take off the drivebelt. Yes it is true, that one has to loosen the right-front wheel lug nuts, then proceed to raise the front of the vehicle and support it on jackstands and finally be able to remove the right front wheel. then unbolt the engine front cover, now working at the backside of the engine front cover, turn the oil pump cover screws simultaneously in anti-clockwise manner until all of the screws are loose and then you can take off the cover and both the gears of the oil pump. Make a note of any identifying features on the rotors and pull them out of the pump body and if necessary mark them in the correct position for reuse. It is recommended to clean and dry all of the parts; the rotors must be checked for signs of wear or damage; if any of the components are scored or damaged, the entire oil pump assembly must be replaced. Using a feeler gauge verify the clearances, the components are acceptable; immerse the rotors in clean engine oil; and insert the rotors into pump body correctly orientated with the ID Marks. Take out and if necessary replace the oil pressure relief valve parts from the front cover and then put back in its respective position. Place the rotors into the housing with the inner rotor hub towards the engine front cover in order to be properly installed so they can be securely fastened. Fit the oil pump cover and screws in a slow step by step with the torque prescribed then fit the oil pressure relief valve parts. Last but not the least, put back the engine front cover, add a fresh oil into the engine and put in another new oil filter. Switch on the engine and examine the tightly for signs of leakage and make sure that the oil pressure goes up to normal; if they fail to get normal or abnormal rise the engine be switched off to avert any heavy losses.