How to replace Fog Light Bulb and other bulb on Chevrolet Impala?

Turn the screw counterclockwise, then remove the entire headlight housing. Next, turn the bulb holder like a clock and pull it straight out. To replace the front side marker light, gently push the old bulb out straight and put a new bulb in by pushing until it locks. Reversing these steps, take the old bulb back out straight. For the front park and turn signal bulbs, follow the same steps: Pull out the lights' housing cover, turn the bulb holder left, grab it, swap the bulb, and put it back in place. Take off the headlight cover, unscrew the fog light bulb holder by turning it to the left, pull off the electrical plug, and install the new bulb holder. To install the new rear light assembly, start by opening the trunk. Then take off the carpeting, unscrew the housing mounting screws, disconnect the electrical wire, and put everything back together again. From below or after removing the license plate, turn the bulb holder counterclockwise to take it out, switch the bulb, and put everything back. To change taillight bulbs, lift the trunk, pick out the carpeting retainer, take off the taillight housing with its plastic nuts, unplug the electrical cord, then follow the bulb installation steps. Inside, remove the dome light cover, change the old bulb, then push the new bulb up until it settled firmly. Start by taking off the lens over the reading light bulb, then delete the current bulb by pulling it out. Finish the job by inserting a new bulb and pushing it into the bulb holder. You can reach the instrument panel courtesy light bulb by pulling it straight out from under the glove box.

Genuine Chevrolet Impala Fog Light Bulb

Fog Lamp Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fog Light Bulbs found

View related parts
Chevrolet Impala Bulb, Stop & Turn Signal & Rear Side Marker Lamp
Part Number: 13591404
$6.76 MSRP: $12.76
You Save: $6.00 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BULB, Tail Lamp
- Position: Rear
- Replaces: 15194045, 13504291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Bulb, Back Up Lamp (Trade #921Ll)
Part Number: 22692679
$3.53 MSRP: $6.66
You Save: $3.13 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: BULB, Bulb
- Replaces: 12450313, 09441956, 9441956
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2016 Chevrolet Impala | IMPALA, LS, LS POLICE CAR, LT, LT 3.5, LTZ, POLICE CAR, SS | 6 Cyl 3.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.8L, 6 Cyl 3.9L, 6 Cyl 3.9L Flex, 8 Cyl 5.3L
View related parts
Chevrolet Impala Bulb Asm,Headlamp (Low Beam)
Part Number: 19257054
$12.01 MSRP: $24.72
You Save: $12.71 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: BULB, Capsule/Headlamp/Fog Lamp
- Replaces: 09441733, 12450177, 01999366, 9441733, 01999357, 1999366, 1999357
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | IMPALA, LS, LT, LUMINA, SS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Bulb,Front Fog Lamp
Part Number: 13590791
$12.35 MSRP: $23.30
You Save: $10.95 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BULB,FRT FOG LP
- Position: Front
- Replaces: 11516247, 12450143, 19257056, 09442876, 9442876
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | LT, SS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Bulb Assembly, Headlamp
Part Number: 13503417
$14.28 MSRP: $26.94
You Save: $12.66 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: BULB, Bulb
- Replaces: 13503374, 22703486, 92095787, 13586977, 19405459
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2016 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L, 6 Cyl 3.9L Flex, 8 Cyl 5.3L
View related parts
Chevrolet Impala Bulb Asm,Front Fog Lamp
Part Number: 19257057
$10.58 MSRP: $18.97
You Save: $8.39 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BULB, Capsule/Headlamp/Fog Lamp; Bulb, Fog Lamp Bulb
- Position: Front
- Replaces: 09442881, 9442881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Impala | LS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Bulb, Turn Signal
Part Number: 13503356
$4.94 MSRP: $8.86
You Save: $3.92 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: BULB, Back Up Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L

Chevrolet Impala Fog Light Bulb

For convenience, the Fog Light Bulbs are fitted in Chevrolet Impala vehicles in order to provide optimal visibility which can accomlish in poor and unfavourable weather like fogginess, heavy rainfall, snowy conditions among others. These bulbs are placed low on the vehicle thus providing a shape of the beam that does not reflect much on the precipitation to enhance better vision by the drivers. Fog light bulbs can be fixed at the front of the Impala and the rear as well, where the front fog lights aims at enhancing visibility of the car while the rear fog lights inform other drivers on existence of the car. Chevrolet Impala Fog Light Bulbs have has been offered in different types and they include, Halogen, LED and HIDs for the prog ery. Compared to the typical Incandescent bulbs, Halogen bulbs may be longer lasting, but they will also degrade in terms of luminosity over the periods. The Fog Light Bulbs being used in Chevrolet Impala models are the optimal in ensuring the optimal performance and safety whenever the driver is in difficult visibility conditions.

Each OEM Chevrolet Impala Fog Light Bulb we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Impala Fog Light Bulb Parts Questions & Experts Answers

Bulb, Back Up Lamp (Trade #921Ll)
22692679
Q: How to replace Fog Light Bulb and other bulb on Chevrolet Impala?
A: Turn the screw counterclockwise, then remove the entire Headlight housing. Next, turn the bulb holder like a clock and pull it straight out. To replace the front side marker light, gently push the old bulb out straight and put a new bulb in by pushing until it locks. Reversing these steps, take the old bulb back out straight. For the front park and turn signal bulbs, follow the same steps: Pull out the lights' housing cover, turn the bulb holder left, grab it, swap the bulb, and put it back in place. Take off the headlight cover, unscrew the fog light bulb holder by turning it to the left, pull off the electrical plug, and install the new bulb holder. To install the new rear light assembly, start by opening the trunk. Then take off the carpeting, unscrew the housing mounting screws, disconnect the electrical wire, and put everything back together again. From below or after removing the license plate, turn the bulb holder counterclockwise to take it out, switch the bulb, and put everything back. To change taillight bulbs, lift the trunk, pick out the carpeting retainer, take off the taillight housing with its plastic nuts, unplug the electrical cord, then follow the bulb installation steps. Inside, remove the dome light cover, change the old bulb, then push the new bulb up until it settled firmly. Start by taking off the lens over the reading light bulb, then delete the current bulb by pulling it out. Finish the job by inserting a new bulb and pushing it into the bulb holder. You can reach the instrument panel courtesy light bulb by pulling it straight out from under the glove box.