Remove the
Headlight housing and place it face down on a clean surface, using a towel or shop rag to protect the lens. Each headlight housing contains two bulbs: high beam and low beam. To access either bulb, turn the circular cover counterclockwise and pull it off. Remove the dust cover from the bulb you intend to replace, then disconnect the electrical connector. After disconnecting, rotate the bulb counterclockwise and pull it out, followed by rotating the bulb holder counterclockwise to remove it from the housing. When installing the new bulb, ensure the three lugs on the bulb holder mounting flange align with the three cutouts in the plastic housing, insert the bulb, and turn it clockwise. Installation follows the reverse order of removal, and avoid touching the glass of the new bulb; if contact occurs, clean it with alcohol and a soft cloth before installation.