There is no provision to adjust the brake pedal, however, if this appears to be low, then the travel should be measured using a tape measure, a yardstick or a ruler. Start by a few applications of the pedal to expel the reserve in the power
Brake Booster. Third, estimate the distance from the ground to the pedal or from the pedal to the steering wheel and take your reading. Then it is required to depress the pedal with about 100 pounds of force. of force and then measure the distance travelled and the result obtained must be compared with the initial value. If pedal travel is too much, there might be air in the system so try to bleed the brakes For this reason, if excessive pedal travel is documented, then there may be a failure of the seal of the master cylinder.