My Garage
My Account
Cart
Genuine GMC Acadia Shift Cable
Transmission Shift Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Shift Cables found
GMC Acadia Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 23256076$43.35 MSRP: $74.76You Save: $31.41 (43%)Ships in 1-3 Business Days
GMC Acadia Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 84359043$47.00 MSRP: $73.91You Save: $26.91 (37%)Ships in 1-2 Business DaysGMC Acadia Automatic Transmission Shifter Cable Assembly
Part Number: 84550890$48.30 MSRP: $75.97You Save: $27.67 (37%)Ships in 1-2 Business DaysGMC Acadia Automatic Transmission Range Selector Lever Cable Assembly
Part Number: 84359042$42.42 MSRP: $64.28You Save: $21.86 (35%)Ships in 1-2 Business DaysGMC Acadia Automatic Transmission Shifter Cable Assembly
Part Number: 84550889$50.06 MSRP: $75.87You Save: $25.81 (35%)GMC Acadia Electronic Transmission Range Selector Man Parking R Cable Assembly
Part Number: 84578112$43.48 MSRP: $65.90You Save: $22.42 (35%)Ships in 1-3 Business DaysGMC Acadia Automatic Transmission Shifter Cable Assembly
Part Number: 84550887$41.96 MSRP: $60.83You Save: $18.87 (32%)Ships in 1-2 Business DaysGMC Acadia Automatic Transmission Shifter Cable Assembly
Part Number: 84550888$49.24 MSRP: $77.43You Save: $28.19 (37%)Ships in 1-3 Business Days
GMC Acadia Shift Cable
The main job of the GMC Acadia Shift Cable is to connect the console shifter with the transmission so that drivers can confidently and smoothly pick gears. Sitting between the lever and the manual arm on the gearbox is the Shift Cable, which translates all the pushing and pulling on the handle into movement that pivots the transmission's manual lever through the familiar PRNDL sequence. This sequence is applied to replace bulky rod linkages once floor shifters began to appear in SUVs. Compared to those earlier rods that could loosen at worn bushings, the Shift Cable has the advantage of being lighter weight, flexible for routing around tight underbodies, and reduced vibration at the lever. Proper lubrication allows the Shift Cable to slide freely over its core without risk of stretching or fraying that would cause sloppy gear engagement. Over the years, engineers have remained with this one cable-driven approach to the midsize crossover rather than adopting electronic shift-by-wire buttons, so operation is familiar to loyal owners. When the Shift Cable stretches, snaps, or its retaining clips fail, the lever may feel loose or refuse to engage a range. Thus, prompt replacement is essential to restore positive gear selection and protect the transmission in every GMC and every Acadia, a practical choice that also allows GMC designers to give the Acadia cabin generous console space without complicating service.
Each OEM GMC Acadia Shift Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
GMC Acadia Shift Cable Parts Questions & Experts Answers
- Q: How to remove and install a shift cable on GMC Acadia?A:To remove the shift cable, set the parking brake and place chocks on the wheels and remove the driver's side floor console extension panel and disconnect the shift cable end. Unclip the shift cable housing from the shift lever bracket and remove the air filter housing air inlet duct and the air filter housing. Next, disconnect the shift cable end from the ball of the transaxle shift lever arm and remove the shift cable housing retainer. Pinch the locking tabs in and remove the cable from the shift cable bracket. Finally, remove the shift cable grommet from the engine compartment firewall and pull out the shift cable from the engine compartment end to remove it from the vehicle. To install the shift cable, simply follow the reverse order of removal. Check the shift lever for correct operation in all ranges and repeat the adjustment if necessary.
