How to remove and reinstall the flywheel in inline engine on GMC Canyon?

To remove the driveplate, first raise the vehicle and support it securely on jackstands, then take out the transmission. Mark the relationship between the driveplate and the crankshaft with a marking pen, and remove the bolts securing the driveplate to the crankshaft. If the crankshaft turns, use a screwdriver to jam the driveplate or flywheel. Carefully take off the driveplate, wearing gloves to protect your fingers from the sharp edges of the ring gear teeth. Clean the driveplate to eliminate grease and oil, inspecting it for cracks and checking for any damaged ring gear teeth, laying it on a flat surface to check for warpage. Clean and inspect the mating surfaces of the driveplate and crankshaft, replacing the rear main oil seal if it is leaking before reinstalling the driveplate. For installation, position the driveplate against the crankshaft, aligning the previously made marks, and ensure correct installation with any alignment dowels or staggered bolt holes. Apply thread-locking compound to the bolt threads and place the retaining ring if equipped. Use only new bolts and wedge a screwdriver through the ring gear teeth to prevent the driveplate from turning while tightening the bolts in a criss-cross pattern to the specified torque. If the front pump seal or O-ring in the automatic transmission is leaking, replace it at this time. The rest of the installation follows the reverse order of removal.

Genuine GMC Canyon Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Flywheels found

View related parts
GMC Canyon Automatic Transmission Flexible Plate Assembly
Part Number: 12654640
$132.41 MSRP: $226.41
You Save: $94.00 (42%)
ADD TO CART
Product Specifications
- Other Name: Plate Assembly, Automatic Transmission Flexible ; Plate, Engine Crankshaft; Drive Plate, Flywheel
- Replaces: 12553054, 12602448, 12606620, 12637677, 12563136, 12580709
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 GMC Canyon | PICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH | 8 Cyl 5.3L
View related parts
GMC Canyon Automatic Transmission Flexible Plate
Part Number: 24100345
$172.21 MSRP: $274.64
You Save: $102.43 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate,Automatic Transmission Flexible; Disc, Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | PICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH | 4 Cyl 2.8L, 4 Cyl 2.9L, 5 Cyl 3.5L, 5 Cyl 3.7L
View related parts
GMC Canyon Flywheel Assembly
Part Number: 24272406
$415.94 MSRP: $663.39
You Save: $247.45 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Asm; Flywheel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 GMC Canyon | EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L
View related parts
GMC Canyon PLATE ASM-A/TRNS FLEX
Part Number: 12727438
$60.71 MSRP: $103.81
You Save: $43.10 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Drive Plate
- Replaces: 12603197, 12721499, 12689004
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 GMC Canyon | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB SLE - 6'2" BOX, CREW CAB SLT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, SLE CREW CAB - 5'2" BOX, SLE EXTENDED CAB - 6'2" BOX, SLT CREW CAB - 5'2" BOX, SLT EXTENDED CAB - 6'2" BOX | 6 Cyl 3.6L
View related parts
GMC Canyon Automatic Transmission Flexible Plate Assembly
Part Number: 12663484
$15.75 MSRP: $26.06
You Save: $10.31 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly, A/Trns Flex; Drive Plate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 GMC Canyon | CREW CAB - 5'2" BOX, CREW CAB SLE -5'2" BOX, CRW CAB SPORT-5'2" BOX(I), SLT CREW CAB - 5'2" BOX, SPORT CREW-5'2" BOX | 4 Cyl 2.7L
View related parts
GMC Canyon Automatic Transmission Flexible Plate Assembly
Part Number: 12686889
$55.30 MSRP: $88.19
You Save: $32.89 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly, Automatic Transmission Flexible; Drive Plate
- Replaces: 12664938, 12630998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | CREW CAB - 5'2" BOX, EXT CAB - 6'2" BOX, EXTENDED CAB - 6'2" BOX, SLE CREW CAB - 5'2" BOX, SLE EXTENDED CAB - 6'2" BOX, SLT CREW CAB - 5'2" BOX, SLT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.5L
View related parts
GMC Canyon Automatic Transmission Flexible Plate Assembly
Part Number: 12699085
$51.25 MSRP: $84.82
You Save: $33.57 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly, A/Trns Flex; Drive Plate
- Replaces: 12680545, 12648842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 GMC Canyon | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB SLE - 6'2" BOX, CREW CAB SLT - 6'2" BOX, EXT CAB - 6'2" BOX, EXTENDED CAB - 6'2" BOX, SLE CREW CAB - 5'2" BOX, SLE EXTENDED CAB - 6'2" BOX, SLT CREW CAB - 5'2" BOX, SLT EXTENDED CAB - 6'2" BOX | 6 Cyl 3.6L
View related parts
GMC Canyon Automatic Transmission Flexible Plate Assembly
Part Number: 24586265
$108.04 MSRP: $155.29
You Save: $47.25 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly, A/Trns Flex; Drive Plate
- Replaces: 12625746, 24585117, 55486218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 GMC Canyon | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB SLE - 6'2" BOX, CREW CAB SLT - 6'2" BOX, EXT CAB - 6'2" BOX, EXTENDED CAB - 6'2" BOX, SLE CREW CAB - 5'2" BOX, SLE EXTENDED CAB - 6'2" BOX, SLT CREW CAB - 5'2" BOX, SLT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.8L Diesel
View related parts
GMC Canyon Engine Crankshaft Flywheel
Part Number: 19177876
Product Specifications
- Other Name: Flywheel,Engine; Flywheel
- Replaces: 12579178, 89060405
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 GMC Canyon | PICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH | 5 Cyl 3.5L
View related parts
GMC Canyon Engine Crankshaft Flywheel
Part Number: 89060406
$194.01 MSRP: $306.62
You Save: $112.61 (37%)
Product Specifications
- Other Name: Flywheel Asm ; Flywheel, Engine Crankshaft; Flywheel
- Replaces: 12569185
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | PICKUP, PICKUP CREW CAB, PICKUP EXTENDED CAB, PICKUP EXTENDED LENGTH | 4 Cyl 2.8L, 4 Cyl 2.9L

GMC Canyon Flywheel

The GMC Canyon's Flywheel performs three essential duties by collecting rotational energy for output power stabilization and by connecting the starter drive to spin the crankshaft at ignition and by allowing clutch disc friction to occur. GMC Canyon vehicles have two types of Flywheel systems which include solid Flywheels in addition to dual mass Flywheels (DMFs). The basic design of solid Flywheels remains simpler than the DMF system since DMFs contain damping units supported by springs to absorb engine vibrations which results in better performance with reduced noise. When DMFs reach the end of their lifespan due to wear the components need replacement instead of possible resurfacing. Wear on the clutch contact surface together with ring gear damage leads to replacement needs either for the Flywheel or the ring gear unit. The GMC Canyon vehicle operates by using the replacement part as the key component to support efficient engine performance.

Each OEM GMC Canyon Flywheel we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Canyon Flywheel Parts Questions & Experts Answers

Automatic Transmission Flexible Plate
24100345
Q: How to remove and reinstall the flywheel in inline engine on GMC Canyon?
A:
To remove the driveplate, first raise the vehicle and support it securely on jackstands, then take out the transmission. Mark the relationship between the driveplate and the crankshaft with a marking pen, and remove the bolts securing the driveplate to the crankshaft. If the crankshaft turns, use a screwdriver to jam the driveplate or flywheel. Carefully take off the driveplate, wearing gloves to protect your fingers from the sharp edges of the ring gear teeth. Clean the driveplate to eliminate grease and oil, inspecting it for cracks and checking for any damaged ring gear teeth, laying it on a flat surface to check for warpage. Clean and inspect the mating surfaces of the driveplate and crankshaft, replacing the rear main oil seal if it is leaking before reinstalling the driveplate. For installation, position the driveplate against the crankshaft, aligning the previously made marks, and ensure correct installation with any alignment dowels or staggered bolt holes. Apply thread-locking compound to the bolt threads and place the retaining ring if equipped. Use only new bolts and wedge a screwdriver through the ring gear teeth to prevent the driveplate from turning while tightening the bolts in a criss-cross pattern to the specified torque. If the front pump seal or O-ring in the automatic transmission is leaking, replace it at this time. The rest of the installation follows the reverse order of removal.