How to remove the brake light switch on GMC Safari?

Take away the brake light switch on models that were made in 1994 and beyond by unplugging the cable from the negative pole of the battery. Then, if necessary take off side knee bolster for a driver. After that undo the retainer holding brake switch and master cylinder push rod to brake pedal. Remove brake light switch and master cylinder push rod from brake pedal, also disconnect electrical connector from switch. Finally pull out the switch out of your automobile. Fit over a slave cylinder pushrod and secure to the pedal using a retaining clip as you install this type of machine on it first. Connect harness electrical connector into it. The rest installation steps are same as removal method but in reverse order. The self-adjusting nature of this kind of switch means there is no need for any adjustment . Check operation of brake lights after fitting,please .

Genuine GMC Safari Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Light Switches found

View related parts
GMC Safari Stop Lamp Switch
Part Number: 15128745
$13.06 MSRP: $24.64
You Save: $11.58 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch, Switch
- Replaces: 15741137, 15981543
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2005 GMC Safari | VAN SAFARI | 6 Cyl 4.3L
View related parts
GMC Safari Switch Assembly, Stop Lamp & Cruise
Part Number: 25524845
$17.72 MSRP: $31.78
You Save: $14.06 (45%)
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Brake Switch, Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1989 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
GMC Safari Stop Lamp Switch
Part Number: 15962182
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
GMC Safari Stop Lamp Switch Assembly
Part Number: 25524848
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1989 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
GMC Safari Switch, Plunger
Part Number: 25524844
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1989 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L
View related parts
GMC Safari Stop Lamp Switch Assembly
Part Number: 15962181
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1993 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L

GMC Safari Brake Light Switch

The Brake Light Switch of the GMC Safari is a signal link that turns on the rear lamps as the driver touches the brake pedal. This allows the traffic behind the vehicle to know that the driver is slowing down or stopping. Located near the pedal assembly, this Brake Light Switch transforms the movement of the brake pedal into an instant electrical pulse to illuminate the red bulbs, thus ensuring the warning is activated in the split second pressure is applied. The design works on a simple normally-open circuit that closes when the plunger is compressed, making it reliable and easy to understand for owners of all generations of GMC vans. Throughout its production history, the Safari range has applied a mechanical, spring-loaded Brake Light Switch rather than hydraulic or pressure-sensing styles. This means that the driver gets a rapid response from the lamp without complex plumbing. In the event that the rear lights do not turn on, the Brake Light Switch can be rapidly diagnosed as this simple unit integrates with wiring harnesses and fuse protection. Attention to the feel of the pedals and operation of the lamps helps to ensure that the final Brake Light Switch in any GMC Safari will continue to work as intended and allow tailing motorists to react safely and in time.

Each OEM GMC Safari Brake Light Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Safari Brake Light Switch Parts Questions & Experts Answers

Switch Assembly, Stop Lamp & Cruise
25524845
Q: How to remove the brake light switch on GMC Safari?
A:
Take away the brake light switch on models that were made in 1994 and beyond by unplugging the cable from the negative pole of the battery. Then, if necessary take off side knee bolster for a driver. After that undo the retainer holding brake switch and master cylinder push rod to Brake Pedal. Remove brake light switch and master cylinder push rod from brake pedal, also disconnect electrical connector from switch. Finally pull out the switch out of your automobile. Fit over a slave cylinder pushrod and secure to the pedal using a retaining clip as you install this type of machine on it first. Connect harness electrical connector into it. The rest installation steps are same as removal method but in reverse order. The self-adjusting nature of this kind of switch means there is no need for any adjustment . Check operation of brake lights after fitting,please .