Genuine GMC Safari Neutral Safety Switch

Transmission Neutral Safety Switch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Neutral Safety Switches found

  • View related parts

    GMC Safari Switch, Parking/Neutral Position & Back Up Lamp

    Part Number: 24229422
    $87.44 MSRP: $130.34
    You Save: $42.90 (33%)
    ADD TO CART
    Product Specifications
    • Other Name: SWITCH, Back Up Lamp; Neutral Safety Switch, Range Sensor
    • Replaced by: 24298931
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1996-2003 GMC Safari | VAN SAFARI | 6 Cyl 4.3L
  • View related parts

    GMC Safari Switch, Parking/Neutral Position & Back Up Lamp

    Part Number: 24221125
    $86.46 MSRP: $147.85
    You Save: $61.39 (42%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: SWITCH, Back Up Lamp
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2004-2005 GMC Safari | VAN SAFARI | 6 Cyl 4.3L
  • View related parts
    Product Specifications
    • Other Name: SWITCH, Back Up Lamp; Back-Up Switch, Neutral Safety Switch
    • Replaces: 15679680
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1990-1995 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L
  • GMC Safari Neutral Safety Switch - 8673634
    View related parts
    Product Specifications
    • Other Name: SWITCH, Transmission Safety Starting Switch Or Speed Sensing
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 1985-1992 GMC Safari | VAN SAFARI | 4 Cyl 2.5L, 6 Cyl 4.3L

GMC Safari Neutral Safety Switch

The GMC Safari Neutral Safety Switch serves as a built in safeguard that stops the engine from cranking unless the van is set to park or neutral, protecting driver and bystanders. Positioned in line with the starter circuit, the Neutral Safety Switch reads the shift lever position then allows current to flow to the starter only when the transmission sits firmly in neutral or park, so a simple gear check happens every time you turn the key. This Neutral Safety Switch goal stays the same across every GMC model year of the midsize Safari van, and the available information points to a single design rather than multiple generations, meaning owners will encounter no confusing style differences or function changes. Because the task is straightforward, the Neutral Safety Switch relies purely on its park or neutral confirmation and does not interact with other vehicle systems. If the van refuses to start while in drive or reverse, that instant lockout shows the Neutral Safety Switch doing its job. As a result, GMC drivers gain an extra layer of predictable safety whenever they fire up their trusty Safari.

Each OEM GMC Safari Neutral Safety Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

GMC Safari Neutral Safety Switch Parts Questions & Experts Answers

  • Q: How to adjust the Neutral Safety Switch on GMC Safari?
    A:
    For 1995 and earlier models, ensure the engine starts only in Park or Neutral. The switch is at the steering column's bottom. Set the parking brake and selector in Neutral. Rotate the switch to Low, then to Park to set correctly. If malfunctioning, replacement might be needed. For removal, set to Neutral, disconnect electrical connectors, and spread tangs to pull out the switch. For installation, align the tang with the shift tube hole, press onto the column, and adjust. For 1996 and later, apply the brake, set to Neutral, disconnect the battery, and raise the vehicle. Remove the lever, connector, and switch retaining bolts. File burrs on the shaft if found. Install using an adjustment tool, align switch hub flats, secure with bolts, install the lever, and test the switch.

Related GMC Safari Parts