How to replace the rear parking brake shoe with rear disc brakes on Pontiac Grand Prix?

This procedure applies only to 1997 and later models with rear disc brakes (except old). Begin by loosening the rear wheel lug nuts, raising the rear of the vehicle, and securely supporting it on jackstands before removing the wheels. Next, remove the brake caliper and the brake disc. Disconnect the parking brake cable from the bracket and the actuator lever, then unbolt the parking brake cable bracket. Proceed to remove the rear hub and bearing assembly, followed by the parking brake actuator and the parking brake shoe. When installing the new shoe and lining assembly, turn the adjuster screw until the shoe lining just drags on the braking surface inside the disc, then remove the disc and back off the adjuster screw until the shoe lining doesn't drag when the disc is installed and turned. Installation is otherwise the reverse of the removal procedure, ensuring to tighten the hub and bearing assembly bolts, the caliper mounting bolts, and the wheel lug nuts to the specified torque.

Genuine Pontiac Grand Prix Parking Brake Shoe

Emergency Parking Brake Shoe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Parking Brake Shoes found

View related parts
Pontiac Grand Prix Brake Kit,Rear Parking
Part Number: 88967272
Product Specifications
- Other Name: BRAKE KIT, Parking Brake Shoe; Bracket, Parking Brake Shoe, Shoe
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Pontiac Grand Prix | 4 DOOR, GT 4 DOOR, GT2 4 DOOR, GTP 4 DOOR, GXP 4 DOOR | 6 Cyl 3.8L, 8 Cyl 5.3L
- 1997-2003 Pontiac Grand Prix | 2 DOOR, 4 DOOR, GT 2 DOOR, GT 4 DOOR, GTP 2 DOOR, GTP 4 DOOR, SE 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Pontiac Grand Prix Shoe Kit,Rear Parking Brake
Part Number: 88967273
Product Specifications
- Other Name: SHOE KIT, Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Pontiac Grand Prix | 4 DOOR, GT 4 DOOR, GT2 4 DOOR, GTP 4 DOOR, GXP 4 DOOR | 6 Cyl 3.8L, 8 Cyl 5.3L

Pontiac Grand Prix Parking Brake Shoe

The Parking Brake Shoe is a car part that plays the duty of holding the wheels of Pontiac Grand Prix vehicle when the car is stationary. Its main purpose is to create friction by clamping the brake lining against the Drum wall thus preventing rotation of the wheels when the parking brake is applied. Since the manufacture of Pontiac Grand Prix different styles of Parking Brake Shoe have been applied on the models to improve its performance and durability. Such differences between these types could include differences in material or design of the products and thus their efficiency and sturdiness. In all, the parking brake shoe is important for maintaining the security of the model in question when it is stationary.

Each OEM Pontiac Grand Prix Parking Brake Shoe we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Pontiac Grand Prix Parking Brake Shoe Parts Questions & Experts Answers

Brake Kit,Rear Parking
88967272
Q: How to replace the rear parking brake shoe with rear disc brakes on Pontiac Grand Prix?
A:
This procedure applies only to 1997 and later models with rear disc brakes (except old). Begin by loosening the rear wheel lug nuts, raising the rear of the vehicle, and securely supporting it on jackstands before removing the wheels. Next, remove the brake caliper and the Brake Disc. Disconnect the Parking Brake Cable from the bracket and the actuator lever, then unbolt the parking brake cable bracket. Proceed to remove the rear hub and bearing assembly, followed by the parking brake actuator and the parking brake shoe. When installing the new shoe and lining assembly, turn the adjuster screw until the shoe lining just drags on the braking surface inside the disc, then remove the disc and back off the adjuster screw until the shoe lining doesn't drag when the disc is installed and turned. Installation is otherwise the reverse of the removal procedure, ensuring to tighten the hub and bearing assembly bolts, the caliper mounting bolts, and the wheel lug nuts to the specified torque.