How to remove and install the Automatic Transmission Shift Position Sensor Switch on Saturn ION?

To remove the Automatic Transmission Shift Position Sensor Switch, set the parking brake and shift lever to neutral. Disconnect the shift control cable and electrical connector from the Automatic Transmission Shift Position Sensor Switch. Remove the switch lever and nut. Then, remove the mounting bolts and switch. To install, ensure the shift lever is in neutral. Align the notches on the shift shaft and Automatic Transmission Shift Position Sensor Switch. Loosely install the mounting bolts and use an alignment tool to rotate the switch into place. Tighten the bolts to specified torque. Reverse the removal process, tightening the lever nut with pliers.

Genuine Saturn Ion Automatic Transmission Shift Position Sensor Switch

AT Shift Position Sensor Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Automatic Transmission Shift Position Sensor Switches found

View related parts
Saturn Ion Parking/Neutral Position Switch Assembly
Part Number: 24219476
$95.23 MSRP: $164.26
You Save: $69.03 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Transmission Safety Start/Warning; Neutral Safety Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Saturn Ion Parking/Neutral Position Switch Assembly
Part Number: 24220734
Product Specifications
- Other Name: SWITCH, Transmission Safety Start/Warning; Neutral Safety Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L
View related parts
Saturn Ion Parking/Neutral Position Switch Assembly
Part Number: 24214519
Product Specifications
- Other Name: SWITCH, Transmission Safety Start/Warning; Neutral Safety Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2004 Saturn Ion | 2 DOOR, REDLINE 2 DOOR | 4 Cyl 2.2L

Saturn Ion Automatic Transmission Shift Position Sensor Switch

The Saturn Ion Automatic Transmission Shift Position Sensor Switch keeps the starter locked out unless the lever sits in park or neutral, protecting driver and passengers from accidental roll away. This small but decisive Automatic Transmission Shift Position Sensor Switch reads the gear selector position and only completes the ignition circuit when the transmission is safely slotted in the two non-drive positions. By interrupting power during any other range, the Automatic Transmission Shift Position Sensor Switch makes sure an Ion cannot lurch forward when the key is turned. Over the production run, Saturn offered no alternate styles, so every factory Ion relies on the same straightforward Automatic Transmission Shift Position Sensor Switch that combines a contact switch with simple wiring to the starting system. Drivers benefit because the Automatic Transmission Shift Position Sensor Switch works instantly with no extra input, using direct electrical continuity rather than software to judge gear state. As long as routine driving keeps the mechanism free of debris, Saturn owners enjoy confident starts without additional thought.

Each OEM Saturn Ion Automatic Transmission Shift Position Sensor Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn Ion Automatic Transmission Shift Position Sensor Switch Parts Questions & Experts Answers

Switch, Automatic Transmission Fluid Pressure Man Valve Position
24239968
Q: How to remove and install the Automatic Transmission Shift Position Sensor Switch on Saturn ION?
A:
To remove the Automatic Transmission Shift Position Sensor Switch, set the parking brake and shift lever to neutral. Disconnect the shift control cable and electrical connector from the Automatic Transmission Shift Position Sensor Switch. Remove the switch lever and nut. Then, remove the mounting bolts and switch. To install, ensure the shift lever is in neutral. Align the notches on the shift shaft and Automatic Transmission Shift Position Sensor Switch. Loosely install the mounting bolts and use an alignment tool to rotate the switch into place. Tighten the bolts to specified torque. Reverse the removal process, tightening the lever nut with pliers.