How do you remove the CKP sensor?

To remove the CKP sensor, start by turning the ignition key to OFF. Then, raise the vehicle and secure it on jackstands. Next, remove the starter motor and disconnect the electrical connector from the CKP sensor. Unscrew the CKP sensor mounting bolt and remove the sensor. If you plan to reuse the old CKP sensor, make sure to remove the old O-ring and discard it. When installing the CKP sensor, always use a new O-ring and tighten the mounting bolt securely.

Genuine Saturn Ion Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Enter your vehicle info to find more parts and verify fitment

Select Vehicle by VIN
Select Vehicle by Model

Select by VIN

Enter your VIN for the most accurate results.

Select by Model

-- Select Make --

-- Select Model --

-- Select Year --

3 Crankshaft Position Sensors found

View related parts
Saturn Ion Sensor Assembly, Crankshaft Position
Part Number: 12674703
- Other Name: Sensor Assembly, Cr/Shf Posn
- Replaces: 12588992
$31.46 MSRP: $59.36
You Save: $27.90 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2006-2007 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L
Less Info
View related parts
Saturn Ion Sensor,Crankshaft Position
Part Number: 12567712
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
- Replaces: 1103703, 24576398, 10456295
$40.51 MSRP: $84.12
You Save: $43.61 (52%)

Add to Cart
More Info
Fits the following Vehicles:
2003-2006 Saturn Ion | 2 DOOR, 4 DOOR, REDLINE 2 DOOR | 4 Cyl 2.2L
Less Info
View related parts
Saturn Ion Sensor
Part Number: 12789959
- Other Name: SENSOR, Distributor (also Knock Sensor); Crankshaft Position Sensor, Crankshaft Sensor
$27.88 MSRP: $52.61
You Save: $24.73 (48%)

Add to Cart
More Info
Fits the following Vehicles:
2004-2007 Saturn Ion | REDLINE 2 DOOR | 4 Cyl 2.0L
Less Info

Saturn Ion Crankshaft Position Sensor Parts Questions & Answers

Sensor Assembly, Crankshaft Position
12674703
Q: How do you remove the CKP sensor?
A: To remove the CKP sensor, start by turning the ignition key to OFF. Then, raise the vehicle and secure it on jackstands. Next, remove the starter motor and disconnect the electrical connector from the CKP sensor. Unscrew the CKP sensor mounting bolt and remove the sensor. If you plan to reuse the old CKP sensor, make sure to remove the old O-ring and discard it. When installing the CKP sensor, always use a new O-ring and tighten the mounting bolt securely.