Genuine Saturn LS Steering Wheel

Navigation Steering Wheel
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Wheel found

  • Saturn LS Steering Wheel - 2852493
    View related parts
    Product Specifications
    • Other Name: Wheel Asm,Steering *Ebony
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2000 Saturn LS | LS1, LW1 | 4 Cyl 2.2L, 6 Cyl 3.0L

Saturn LS Steering Wheel

The Saturn LS Steering Wheel allows the driver to precisely direct the vehicle on the road, converting hand movements into coordinated tire response. The Steering Wheel utilizes tried-and-true rack and pinion geometry in the majority of trims throughout the model's production run, while some versions fit the same basic wheel with hydraulic power assistance for lighter effort at parking speed and a firmer feel on the highway. In earlier build years, a simpler mechanical link was applied. As updates progressed, electric power steering was introduced. In electric power steering, a small motor is placed in the column. Therefore, the Steering Wheel transmits driver inputs with less strain but clearly keeps feedback. Regardless of which version you have, the Steering Wheel is a hard-wearing part. However, heavy use can cause vibrations, stiffness and unusual noises, which indicate that it needs to be replaced before you lose control of your vehicle. The owners of Saturn LS sedans will see that the later LS versions sport a slightly thicker rim and a new spoke arrangement for better grip, but the steering ratio remains the same. The cost of a new Steering Wheel on Saturn families is low, making it an affordable restoration for younger drivers learning about vehicle upkeep.

Each OEM Saturn LS Steering Wheel we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Saturn LS Steering Wheel Parts Questions & Experts Answers

  • Q: How to remove the steering wheel on Saturn LS?
    A:
    To remove the steering wheel, begin by parking the wheels straight ahead and disconnecting the negative battery terminal. Then disable the airbag system and remove the steering column covers. In order to release the airbag module: Insert a flat-bladed screwdriver into slots on the backside of the steering wheel and spread retaining springs; then turn the screwdriver to release the air bag retaining posts. Disconnect its electrical connectors, lift it away from steering wheel and remove it. Next, mark down where steering wheel is related to shaft, take off your steering wheel nut, then use your puller for pulling out safely and carefully not threading inside your bolts too far. Disconnect any remaining electrical connectors. To install a clock spring make sure you have it centered with arrow pointing up; if you turned steering shaft follow steps how to properly center it. The installation includes aligning marks on a shaft and steering wheel hub, tightening a new nut of a wheel rotating on a specified torque value, reinstalling an airbag module and enabling an airbag system.

Related Saturn LS Parts