Make sure this part fits

Buick 20513752 Rear Compartment Lid Latch

1986-2000 Buick

Customer Questions & Expert Answers (5)
GM 20513752 Rear Compartment Lid Latch
  • Part Description
    Latch,Rear Compartment Lid
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$56.95 MSRP: $85.15
You Save: $28.20 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Buick
    Manufacturer Part Number20513752
    Part DescriptionLatch,Rear Compartment Lid
    Other NamesLatch, Lock
    Item Dimensions6.4 x 3.3 x 3.1 inches
    Item Weight0.70 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU20513752
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-2000 Buick Century4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 3.1L, 6 Cyl 3.3LCUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GL, GLX, GS, LIMITED, LIMITED 4 DOOR, LS, REGAL, SPECIAL, SPECIAL 4 DOOR
    1986-1999 Buick Lesabre6 Cyl 3.0L, 6 Cyl 3.8L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR
    1991-2000 Buick Park Avenue6 Cyl 3.8LPARK AVENUE, ULTRA
    1988-1991 Buick Reatta6 Cyl 3.8L2 DOOR, REATTA, RIVIERA, T TYPE
    1992-2000 Buick Regal6 Cyl 3.1L, 6 Cyl 3.8L2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GL, GLX, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL
    1995, 1986-1993 Buick Riviera6 Cyl 3.8L2 DOOR, REATTA, RIVIERA, T TYPE
    1992-1996 Buick Roadmaster8 Cyl 5.7L4 DOOR, LIMITED, LIMITED SEDAN
    1992-1998 Buick Skylark4 Cyl 2.3L, 4 Cyl 2.4L, 6 Cyl 3.1L, 6 Cyl 3.3L2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, LIMITED 2 DOOR, LIMITED 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20513752 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and install Door Lock on Cadillac ElDorado? Posted by Customer
    A:
    To remove and install the lock striker on 1990 Deville and Fleetwood, first make a pencil mark at the position of the lock striker on the body lock pillar and then remove the lock striker by inserting tool J-23457, BT-7107 or equivalent under the lock striker. During installation position the striker in the recommended position according to the pencil lines and then tighten the bolt to Tw:42 ft. lbs. (55 Nm). In the event of adjustment, make sure that the door is level, apply modeling clay on the lock bolt aperture, shut the door halfway and make an impression on the striker, and then adjust it as and where possible. To disassemble the inside remote handle, it is necessary to first remove the door panel and the water deflector; then by using a drill, one has to drill the rivets and after this the handle has to be slid rearwards to take it off. For mounting, just insert the tabs into the respective slots and fasten with the help of rivets. To make some changes on the power door lock actuator, the door panel and water deflector need to be detached and linkage disconnected, and rivets must be drilled and the actuator is then taken out. To assemble, fasten the actuator using the rivet nuts and perform test operation. In its preparation for the door lock assembly, one has to first remove the water deflector, door panel, and disconnect all the rods and lastly reverse the tab to unlock the lock. Mount a new service lock having a block-out plug 'ON'; place the door ajar switch; lock it. For the outside handle, make sure that the door glass is in the uppermost position, then thereafter, the door panel/ water deflector is to be removed, the handle rod disconnected, the wiring connector is to be disconnected together with the removal of the retaining screws. Treating the handle with needed care set and tighten the screws to 54 inch lbs. (7 Nm). Again for the lock cylinder, extend the door glass fully up, pop out the door panel and water deflector, disconnect the rod, pull out the wire connector and unscrew the lock cylinder retainer. Set a gasket over the lock cylinder and then replace the cylinder and the retainer. For 1991-93 models, the lock striker, inside remote handle, outside handle, and lock cylinder should be installed in the same manner, while being tightened and screwed in place with the correct fasteners. During the installation of the door lock actuator in couple, sedan, and rear doors one has to first remove the door panel and water deflector; the actuator harness has to be disconnected; the rivet has to be drilled out and the actuator has to be installed with rivets. As for 1990-91 Eldorado and Seville, the similar procedures for the lock striker, inside remote handle, lock actuator and lock assembly should be demanded to be installed and operated correctly. On 1992-98 Eldorado and Seville, and 1994-98 Deville, locate the striker position, then, take out the striker and bolts, assemble the striker and finally insert it to place with the proper torque. The same process should be followed for inside remote handle and lock actuator and lock assembly so that all coming parts are connected and fixed properly. For the outside handle and lock cylinder, the door glass should be fully up; the necessary components should be removed and properly fitted.
    Posted by GMPartsGiant Specialist
    Q:
    How to remove and reinstall a Trunk Latch and striker on Chevrolet Beretta? Posted by Customer
    A:
    Disconnect the negative cable from the battery and place it out of the way to prevent accidental contact with the negative terminal, which would restore power to the vehicle's electrical system. For models equipped with a trunk lock cylinder, disconnect the cable by using a small screwdriver to hold the release tab down and then pull the cable out of the solenoid. If applicable, remove the electronic solenoid, unbolt and take out the latch, and also remove the ajar switch if present. Next, take off the retaining nut and lift off the striker, ensuring to remove any retaining bolts. Installation follows the reverse order of removal.
    Posted by GMPartsGiant Specialist
    Q:
    What is the installation process for the inside remote handle for the 1993 Cadillac Fleetwood? Posted by Customer
    A:
    Place the tabs into the slots and secure the handle with rivets.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after removing the electronic solenoid and latch for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    After that, remove the retaining nuts and lift off the striker.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Trunk Latch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20513752, the Right Choice

To ensure reliability, purchase GM part # 20513752 Rear Compartment Lid Latch. It is sometimes referred to as Buick Door Lock, Buick Door Lock Actuator, Buick Tailgate Latch, Buick Tailgate Lock, Buick Trunk Latch. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Century, Lesabre, Regal models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20513752 Rear Compartment Lid Latch. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Buick parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly