Make sure this part fits

Cadillac 7470503 New Old Stock Rear Wheel Hub Assembly

1985-1993 Cadillac

Customer Questions & Expert Answers (11)
GM 7470503 New Old Stock Rear Wheel Hub Assembly
  • Part Description
    Hub Asm,Rear Wheel ; Hub, Rear Wheel
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Cadillac
    Manufacturer Part Number7470503
    Part DescriptionHub Asm,Rear Wheel ; Hub, Rear Wheel
    Item Dimensions6.9 x 6.9 x 6.6 inches
    Item Weight8.20 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU7470503
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1985-1993 Cadillac Deville6 Cyl 4.3L Diesel, 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L2 DOOR, 4 DOOR, 60 SPECIAL 4 DOOR, BROUGHAM 2 DOOR FWD, BROUGHAM 4 DOOR FWD, CONVERSION, FUNERAL COACH, LIMOUSINE 4 DOOR, LIMOUSINE 4 DOOR CTR PART, TOURING 4 DOOR
    1986-1990 Cadillac Eldorado8 Cyl 4.1L, 8 Cyl 4.5LCOMMERCIAL CHASSIS, ELDORADO
    1985-1993 Cadillac Fleetwood6 Cyl 4.3L Diesel, 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, 60 SPECIAL 4 DOOR, BROUGHAM 2 DOOR FWD, BROUGHAM 4 DOOR FWD, CONVERSION, FUNERAL COACH, LIMOUSINE 4 DOOR, LIMOUSINE 4 DOOR CTR PART, TOURING 4 DOOR
    1986-1990 Cadillac Seville8 Cyl 4.1L, 8 Cyl 4.5LSEVILLE
  • Customer Questions & Expert Answers

    Q:
    Will this part number fit my car? Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 7470503 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to repack and adjust Wheel Bearing during brake repair service on Buick Century? Posted by Customer
    A:
    The bearings should be repacked every 30,000 miles (48,000 km) and adjusted properly. It is recommended to repack the front wheel bearings during brake repair service. Repack the bearings when removing the rotors for brake pad replacement. Properly adjusted bearings should have a slightly loose feeling and should never be preloaded. If the bearings are too loose, clean and inspect them before repacking and adjusting. To adjust the bearings, raise the vehicle, remove the wheel cover and dust cap, remove the cotter pin and spindle nut, tighten the nut as the wheel spins, back off the nut, and insert the cotter pin. For removal and installation, raise and support the vehicle, remove the wheel and tire assemblies, remove the hub/disc assembly, remove the outer and inner bearing assemblies, wash and inspect the parts, install a new race, pack the bearing with grease, install a new grease seal, install the hub or hub/rotor assembly, install the rotor, install the wheel and adjust the wheel bearing, and install the grease cap. When repacking the bearings, clean and inspect them, fill the bearing cone and roller assemblies with grease, and reassemble and adjust the bearings.
    Posted by GMPartsGiant Specialist
    Q:
    How should rear wheel or wheel bearing looseness be addressed in front wheel drive 1991 Cadillac Fleetwood? Posted by Customer
    A:
    Adjust the wheel bearing to specification; if it is still loose, replace it. Additionally, torque the lug nuts to specification and recheck for looseness. If the wheel bearing is worn or damaged, it should be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How should rear wheel or wheel bearing looseness be addressed in front wheel drive 1990 Cadillac Eldorado? Posted by Customer
    A:
    Adjust the wheel bearing to specification; if it is still loose, replace it. Additionally, torque the lug nuts to specification and recheck for looseness. If the wheel bearing is worn or damaged, it should be replaced.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    How should the caliper be handled during removal on the 1990 Cadillac ElDorado? Posted by Customer
    A:
    Remove and discard the caliper mounting bracket bolts. Remove the caliper and suspend it in the wheel well with wire. Do not disconnect the brake hose or allow the caliper to hang by the brake hose.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    How should the hub nut be tightened for the 1992 Cadillac Fleetwood? Posted by Customer
    A:
    On 1990-91 vehicles, tighten the hub nut to 185 ft. lbs. (251 Nm). On 1992-98 vehicles, tighten the hub nut to 110 ft. lbs. (145 Nm), except on Deville and Fleetwood equipped with J55 brake, in which case the torque is 130 ft. lbs. (177 Nm).
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What is the torque specification for tightening the retaining bolts during installation for the 1993 Cadillac Fleetwood? Posted by Customer
    A:
    Install the hub and bearing assembly with the retaining bolts and tighten the bolts to 52 ft. lbs. (70 Nm).
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    Are there any electrical or cable connections that need to be addressed during removal for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Yes, if applicable, unplug the ABS electrical connector and disconnect the parking brake cable.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    Q:
    What should be done with the old oil seal of the 1984 Oldsmobile Cutlass? Posted by Customer
    A:
    The old oil seal should be discarded.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    When should the front wheel bearings be checked for the 1984 Oldsmobile Cutlass? Posted by Customer
    A:
    The front wheel bearings should be checked whenever the front wheels are raised for any reason.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Bearing
    Q:
    What additional step is required for the ABS-equipped 1990 Pontiac Grand Prix? Posted by Customer
    A:
    For ABS-equipped models, remove the bolt and secure the sensor out of the way.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Wheel Hub
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 7470503, the Right Choice

To ensure reliability, purchase GM part # 7470503 New Old Stock Rear Wheel Hub Assembly. It is sometimes referred to as Cadillac Wheel Bearing, Cadillac Wheel Hub. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Cadillac Deville, Fleetwood, Seville models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 7470503 New Old Stock Rear Wheel Hub Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Cadillac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly