Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

GM 26027964 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint

1983-1996 GM

Customer Questions & Expert Answers (9)
GM 26027964 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint
GM 26027964 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint
  • Part Description
    BOOT KIT, Front Axle
  • Position
    Front
  • Replaces
    26062411
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number26027964
    Part DescriptionBOOT KIT, Front Axle
    Other NamesBoot, Inner Boot
    Item Dimensions7.7 x 7.2 x 6.5 inches
    Item Weight2.00 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces26062411
    ManufacturerGeneral Motors
    SKU26027964
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1995-1996 Chevrolet Blazer6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1996 Chevrolet S104 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1992-1996 GMC Jimmy6 Cyl 4.3L2 DOOR, 4 DOOR
    1983-1991 GMC S154 Cyl 1.9L, 4 Cyl 2.0L, 4 Cyl 2.2L Diesel, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3L2 DOOR, 4 DOOR, PICKUP
    1991-1996 GMC Sonoma4 Cyl 2.2L, 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 4.3LPICKUP
    1991 GMC Syclone6 Cyl 4.3LPICKUP
    1992-1993 GMC Typhoon6 Cyl 4.3L2 DOOR, 4 DOOR
    1996, 1991-1994 Oldsmobile Bravada6 Cyl 4.3LBRAVADA

  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 26027964 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the importance of driveaxle boots and how should they be maintained on Chevrolet Blazer? Posted by Customer
    A:
    CV boots are necessary because they function as a shield that prevents dirt, water, and debris from getting inside to destroy the constant velocity (CV) joints. Also, it is important to inspect them for tears, cracks, and loose clamps periodically. This can be done by tearing over time but regularly checking for tears, cracks and loose clamps on the boot on the pointed area if there any cracks or grease on it. In case of cracked covers or if the grease comes out through small opening then new boots have to be installed.
    Posted by GMPartsGiant Specialist
    Q:
    What is the importance of driveaxle boots and how should they be maintained on GMC Sonoma? Posted by Customer
    A:
    CV boots are necessary because they function as a shield that prevents dirt, water, and debris from getting inside to destroy the constant velocity (CV) joints. Also, it is important to inspect them for tears, cracks, and loose clamps periodically. This can be done by tearing over time but regularly checking for tears, cracks and loose clamps on the boot on the pointed area if there any cracks or grease on it. In case of cracked covers or if the grease comes out through small opening then new boots have to be installed.
    Posted by GMPartsGiant Specialist
    Q:
    What should you do after removing the inner CV joint for the 1996 Chevrolet Blazer? Posted by Customer
    A:
    After removing the inner CV joint, you should clean all the old grease from the housing and spider assembly, and inspect for any signs of wear. Then, pack the housing with grease and place the remainder in the boot. Slide the boot onto the axle and install the spider assembly with the recess facing the end of the driveaxle. Finally, install the tri-pot housing and adjust the collapsed dimension of the joint before installing the retaining clamps and the driveaxle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What is the first step to remove and replace the CV joints on a driveaxle for the 1999 Chevrolet S10? Posted by Customer
    A:
    The first step is to remove the driveaxle and place it in a vise lined with rags to protect the shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should be done if cracks or leaking grease are found during inspection for the 1997 Chevrolet S10? Posted by Customer
    A:
    If any cracks or leaking grease are found during inspection, replacement of the boots is mandatory.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    How should the driveaxle boots be cleaned for the 1998 GMC Jimmy? Posted by Customer
    A:
    The driveaxle boots should be cleaned with soap and water. It is advisable to avoid oil and grease as they can lead to premature deterioration of the boot material.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do after removing the outer CV joint for the 2003 GMC Sonoma? Posted by Customer
    A:
    After removing the outer CV joint, you should remove the old boot and mark the inner race and cage for reassembly. Remove the balls from the cage and remove the inner race from the cage. Clean all the components and inspect for wear.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    Q:
    What should you do after removing the inner CV joint for the 1997 GMC Jimmy? Posted by Customer
    A:
    After removing the inner CV joint, you should clean all the old grease from the housing and spider assembly, and inspect for any signs of wear. Then, pack the housing with grease and place the remainder in the boot. Slide the boot onto the axle and install the spider assembly with the recess facing the end of the driveaxle. Finally, install the tri-pot housing and adjust the collapsed dimension of the joint before installing the retaining clamps and the driveaxle.
    Posted by GMPartsGiant Specialist
    See expert answers on similar CV Boot
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 26027964, the Right Choice

To ensure reliability, purchase GM part # 26027964 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint. It is sometimes referred to as GM CV Boot. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Chevrolet Blazer, S10 models. It fits GMC Jimmy, S15, Sonoma. It also fits Oldsmobile Bravada.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 26027964 Boot Kit,Front Wheel Drive Shaft Tri, Pot Joint. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed GMC parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly